Automotive Experiences
Characteristics of Diamond-Like Carbon Coating Using Plasma Assisted Chemical Vapor Deposition on Steel Tool
Abstract
High Speed Steel (HSS) tool is commonly used in engineering applications, especially as cutters. The shortfall of this materials are wear and corrosion. However, these can be reduced by coating the surface of the material. Therefore, the purpose of this research is to investigate the effects of Diamond Like Carbon (DLC) coating, quenching heating treatment, and tempering on the physical and mechanical properties of HSS surface. The physical characteristics which will be investigated is the micro structure, while the mechanical characteristics are hardness, wear and corrosion rate. HSS has variations in their chemical composition (% mass): 0.75”“1.5 C, Co >12, V > 5, 4”“4.5 Cr,10”“20 W and Mo. Furthermore, DLC coating uses Plasma Assisted Chemical Vapor Deposition (PACVD) technique with variation in the duration of coating (1,2,3,4,5 and 6 hours) at temperature of 300℃, with pressure variations of 1.0, 1.2, 1.4, 1.6, 1.8 and 2.0 millibar. DLC coating material be treated from methane or ethane gas, which is streamed into the fire with Argon (Ar). The result shows variations in DLC coating and the hardness grade depends on the coating time and pressure variation. DLC coating for a duration of 4 hours under 1.8 mbar pressure can reduce the surface hardness of HSS tool by 62% accompanied by increased ductility.
Keywords
HSS tool; Diamond like carbon; Surface hardness; PACVDReferences
- H. Moriguchi, H. Ohara, and M. Tsujioka, “History and Applications of diamond-like carbon manufacturing processes,†SEI Technical Review,†no. 82, pp. 52–58, 2016.
- L. Bai, N. Srikanth, G. Kang, and K. Zhou, “Influence of third particle on the tribological behaviors of diamond-like carbon films,†Scientific Reports, vol. 6, pp. 1–11, 2016. DOI: https://doi.org/10.1038/srep38279
- J. Grafika, Y. Telp, V. Malau, T. Sujitno, J. Grafika, and Y. Telp, “Deposisi Lapisan Tipis Dlc ( Diamond-Like Carbon ) Dengan Teknik Cvd (Chemical Vapour Deposition) Pada Permukaan Machinery Steel Hq 805,†Prosiding Seminar Nasional Energi & Teknologi (SINERGI) 2017, pp. 333–341, 2017.
- M. Taufik, N. Umehara, T. Tokoroyama, and M. Murashima, “The effects of oil additives and mating materials to the friction , wear and seizure characteristics of a-C : H coating,†Jurnal Tribologi, vol. 18, no. July, pp. 1–19, 2018.
- A. Bendavid, P. J. Martin, L. Randeniya, M. S. Amin, and R. Rohanizadeh, “The Properties of Fluorine Containing Diamond-Like Carbon Films Prepared by Pulsed DC Plasma-Activated Chemical Vapour Deposition,†Diamond and Related Materials, vol. 19, no. 12, pp. 1466–1471, 2010. DOI: https://doi.org/10.1016/j.diamond.2010.10.001
- C. Jongwannasiri and S. Watanabe, “Effect of Plasma Treatment on Friction Coefficient of Diamond-like Carbon Films,†Journal of The Surface Finishing Society of Japan, vol. 65, no. 12, pp. 621–624, 2014. DOI: https://doi.org/10.4139/sfj.65.621
- A. Nishimoto, E. Furuya, and K. Kousaka, “Nitriding and DLC Coating of Aluminum Alloy Using High-Current Pressure-Gradient-Type Plasma Source,†International Journal of Metallurgy and Metal Physics, vol.5, no.1, pp. 1-10, 2020. DOI: https://doi.org/10.35840/2631-5076/9248
- D. Priyantoro, T. Sujitno, B. Pribadi, Z. A. A. Najib, “Perlakuan Permukaan Pada Roller Rantai Dengan Metode Plasma Carburizing dari Campuran Gas He dan CH4 Pada Tekanan 1,8 mbar,†Jurnal Forum Nuklir (JFN), vol. 10, no. 2, pp. 71–74, 2016. DOI: https://doi.org/10.17146/jfn.2016.10.2.3554
- F. J. Hoe, T. Aizawa, and S. Yukawa, “Synthesis and Characterization of Doped and Undoped Nano-Columnar DLC Coatingâ€, Jurnal Teknologi, vol. 62, no. 1, pp. 17–28, 2013. DOI: https://doi.org/10.11113/jt.v62.1176
- I. MazÃnová and P. Florian, “Materials Selection in Mechanical Design,†in Lecture Notes in Mechanical Engineering, vol. 16, 2014, pp. 145–153. DOI: https://doi.org/10.1007/978-3-319-05203-8_21
- W. Anhar and N. Jamal, “Pengaruh Post-Treatment Plasma CVD Lapisan Diamond-Like Carbon Terhadap Sifat Kekerasan Permukaan Baja Aisi 410,†Rotor, vol. 10, no. 1, pp. 62–66, 2017. DOI: https://doi.org/10.19184/rotor.v10i1.5150
- V. Malau, P. T. Iswanto, W. S. Slat, and D. Suharlan, “Fatigue Endurance and Hardness Characterization of DLC (Diamond-Like Carbon) Coating on Hq 805 Substrat,†Prosiding Simposium Nasional Rekayasa Aplikasi Perancangan dan Industri, pp. 349–356, 2016.
Most read articles by the same author(s)
- Wawan Purwanto, Hasan Koten, Hasan Maksum, Dwi Sudarno Putra, Anang Baharuddin Sahaq, Integrated Examines of Hydrolyzers, Compression Ratio, Spark Plugs, and Ethanol Gasoline in Four Stroke Spark Ignition Engine for Potentially Application of Higher Ethanol Application , Automotive Experiences: Vol. 9 No. 1 (2026)
- Bagas Arif Prasetyo, Dwi Ahmad Rizani, Muji Setiyo, Noto Widodo, Saifudin Saifudin, Bagiyo Condro Purnomo, Estimasi Pemborosan Bahan Bakar Akibat Kemacetan Menggunakan Analisis Citra Google Map (Studi Kasus pada Simpang Armada Town Square Mall Magelang) , Automotive Experiences: Vol. 1 No. 02 (2018)
- Yusuf Dewantoro Herlambang, Wahyu Sulistiyo, Margana Margana, Nanang Apriandi, Septiantar Tebe Nursaputro, Marliyati Marliyati, Muji Setiyo, Wawan Purwanto, Muhammad Latifur Rochman, Jin Cherng Shyu, Study on Solar Powered Electric Vehicle with Thermal Management Systems on the Electrical Device Performance , Automotive Experiences: Vol. 7 No. 1 (2024)
- Wawan Purwanto, Jerry Chih Tsong Su, Muhammad Latifur Rochman, Budi Waluyo, Krismadinata Krismadinata, Ahmad Arif, Study on the Addition of A Swirling Vane to Spark Ignition Engines Fueled by Gasoline and Gasoline-Ethanol , Automotive Experiences: Vol. 6 No. 1 (2023)
- Wawan Purwanto, Hasan Maksum, Ahmad Arif, Muhammad Latifur Rochman, Sujito Sujito, Kathleen Ebora Padrigalan, Exploration of Engine Parameters for Emission Reduction in Gasoline-Ethanol Fueled Engines , Automotive Experiences: Vol. 7 No. 3 (2024)
- Saifudin Saifudin, Nurul Muhayat, Eko Surojo, Yupiter HP Manurung, Triyono Triyono, Mitigation of Porosity and Residual Stress on Car Body Aluminum Alloy Vibration Welding: A Systematic Literature Review , Automotive Experiences: Vol. 5 No. 3 (2022)
- Ade Burhanudin, Bambang Septian, Budi Waluyo, Saifudin Saifudin, Investigasi Kesalahan Pembacaan Display Konsumsi Bahan Bakar pada Mobil Datsun Go , Automotive Experiences: Vol. 1 No. 02 (2018)