A Review on Automatic Tyre Pressure Control Technologies and Solar as Possible Energy Solution

Authors

DOI:

https://doi.org/10.31603/benr.v4i02.12314

Keywords:

Tyre, Inflation, Pressure, Solar, Energy

Abstract

Tyre inflation pressure plays a crucial role in ensuring safe and economical driving. Automatic tyre inflation systems are designed to constantly maintain tyre pressure at the proper level. Different techniques exist to monitor, control and maintain tyre inflation pressure. Systems currently in development for tyre pressure control include dual tyre pressure equalizers, automatic tyre inflation system, central tyre inflation system as well as others which are in the prototype stage. In dual tyre pressure equalizer systems, a single sensor unit is mounted to the vehicle wheel end, monitoring the pressure in both tyres of a dual-tyre assembly, with a hose connection to each tyre valve stem. If pressure levels between the tyres do not match, either due to temperature warming of one tyre position versus the other, unequal loading, or slow air seepage, the system will attempt to bring the inflation pressure of the two tyres to the same level. Automatic tyre inflation systems monitor tyre inflation pressure relative to a pre-set target and re-inflate tyres whenever the detected pressure is below the target level. In central tyre inflation system, the driver can select the target pressure from an in-cab display, in order to raise or lower the tyre inflation level depending on the operating conditions of the vehicle. One of the greatest challenges in designing a tyre pressure control system is providing the required energy to power the system. This paper reviews some state-of-the-art tyre pressure control technologies. Then possibility of solar energy-powered solution reviewed. The proposed solar energy solution is for land vehicles used especially in arid region of the world.

 

Author Biographies

  • Taiwo Semiu Amosun, Federal University Otuoke, Bayelsa

    DEPARTMENT OF MECHANICAL AND MECHATRONICS ENGINEERING, FEDERAL UNIVERSITY OTUOKE, BAYELSA, NIGERIA

    RANK: SENIOR LECTURER

  • Obiora Emeka Anisiji, FEDERAL UNIVERSITY OTUOKE, BASYELSA, NIGERIA

    Department of Mechanical and Mechatronic Engineering, Federal University Otuoke, Bayelsa, Nigeria.

    LECTURER

References

Kubba, A and Jiang, K. A (2014). Comprehensive study on technologies of tyre monitoring

systems and possible solutions. Open Access;Sensors; 1(14), pp10306-10345

Bansal, R., Swami, S., Chwala, A.G and Hussain, M (2018). Automatic Tyre

Inflation System In Dynamic Condition. International Journal of Automobile

Engineering Research and Development (IJAuERD); 8 (1).

Omprakash, P and Kumar, S (2014). M.A.R.S, Mechanized Air Refilling System. International

Journal of Information Sciences and Techniques (IJIST),4(3), pp. 91-98.

Mohapatra, A.(2011). Design and Implementation of Diaphragm Tyre Pressure Sensor in

a Direct Tire Pressure Monitoring System(TPMS) for Automotive Safety Applications.

International Journal of Engineering Science and Technology, August, 3(8), pp. 6514-

Sahil D (2020). Automatic tyre pressure inflation system. International Journal of Progressive

Research in Science and Engineering; 1(3).

Indrajeet, B (2016). A Survey on Automatic Air Inflating System for Automobile. International

Journal of Innovative Research in Science, Engineering and Technology (An ISO 3297:

Certified Organization),Vol. 5, Issue 10.

Kagane,M, Halande, P, Chaure, M,Tambe, R,Bugade, A (2017). Design and Manufacturing of Self

Inflating Tire System†International Conference on Ideas, Impact and Innovation in Mechanical

Engineering, ICIIIME.

Bachute, R. P, Jadhav, S,Gandhile, D, Gophane, A, Raskar, S (2019). Automatic Air Inflation in Vehicle

Tyre. IJSRD - International Journal for Scientific Research & Development| Vol. 7, Issue 02, | ISSN

(online): 2321-0613

Kamlesh R. P (2017). Self-Inflating Tyre System. Imperial Journal of Interdisciplinary Research (IJIR)

Vol-3, Issue- 3, ISSN: 2454- 1362.

Kumar, K and Manish, K (2019). Automatic Tyre Inflation and Deflation. Paripex - Indian

Journal Of Research | Volume-8 | Issue-12 | December - 2019 | Print ISSN No. 2250 -

| DOI: 10.36106/paripex.

Mushiri, T (2016). Design of an automatic tyre pressure inflation system for small vehicles.

Proceedings of the International Conference on Industrial Engineering and Operations

Management Detroit, Michigan, USA, September 23-25, 2016.

Jeeva, G V., Bharathi , Wadmare, A. V (2017). Design And Fabrication of Automatic Tyre Pressure

Controlling and Self Inflating System, IOSR Journal of Mechanical and Civil Engineering

(IOSR-JMCE) eISSN: 2278-1684,p-ISSN: 2320-334X PP. 01-05 www.iosrjournals.org

CODA Development, Czech Republic (2009). Self-inflating tyre system. Publication of society of

automobile engineers (SAE). World Congress, Detroit.

Ikponwosa,O.,Olawale, S., Adedayo, B.A, Dickson E., Kenechi,A.V 2014. Solar Energy Potential and its

Development for Sustainable Energy Generation in Nigeria: A Roadmap in achieving this feat.

International journal of Engineering and Management Sciences (IJEMS)5(2):61-67.

Jain, U, Tyagi, S and Kumar (2019). Automatic Tyre Inflation System. International Journal for

Technological Research in Engineering, volume 6, Issue 8, pp 5248-5250.

Diwakar, & Sahil. (2020). Automatic Tyre Pressure Inflation System. International Journal of Progressive

Research in Science and Engineering, 1(3), 219-221. https://journal.ijprse.com/index.php.

Osajda, M. (2004). Highly Integrated Tire Pressure Monitoring Solutions. In: Valldorf, J., Gessner, W.

(eds) Advanced Microsystems for Automotive Applications. VDI-Buch. Springer, Berlin,

Heidelberg. https://doi.org/10.1007/978-3-540-76989-7_3

Sandoni, G and Ringdorfer, M (2006). Electronic Regulation Of An Automated Car Tyres Pressure

Control System. IFAC Proceedings Volumes, Volume 39, Issue 16, 2006, pp 514-519.

Schmeitz, A. J. C., Besselink, I. J. M., Hoogh, de, J., & Nijmeijer, H. (2005). Extending the Magic

Formula and SWIFT tyre models for inflation pressure changes. In Reifen, Fahrwerk, Fahrbahn,

pp. 201-225.

Bharathi1, V.J , Johny, D ,Kabilan, G, Karthik, K ,Mohanraj, M (2016). Design And Fabrication

Of Automatic Tyre Inflation And Deflation System, IJARIIE, Vol-2 Issue-3,pp 302-304. ISSN(O)-

-4396

Michael A., Anthony B., Jonathan Q. and Lau Y.2006. Dynamically-Self inflating tyre system. Final

engineering report submitted to the department of mechanical, University of Michigan, Ann Arbor,

MI48109-2125.

Hrabal (2012). Chamber of a Peristaltic Pump for Tyre Pressure Adjustment. Unuted States Patent and Trademark Office (USPTO). Publication Number: 20120211137.

Published

2024-11-30

How to Cite

A Review on Automatic Tyre Pressure Control Technologies and Solar as Possible Energy Solution. (2024). Borobudur Engineering Review, 4(2), 59-72. https://doi.org/10.31603/benr.v4i02.12314

Most read articles by the same author(s)