Borobudur Engineering Review
Improved Engine Performance Using Ozone Generator
Abstract
An increase in the number of vehicles today will result in an increase in fuel oil consumption and emission pollution. Therefore, it is necessary to optimize for fuel oil economy and emission reduction by improving engine performance. Improving engine performance can be done through several factors, including; with compression ratio, volumetric efficiency and fuel quality. The purpose of this study is to prove that with the addition of ozone (O3) the combustion process will be more reactive than oxygen (O2) so that it can produce faster and more complete combustion, This study will convert oxygen (O2) into more reactive ozone (O3) by using a 15 g/h plasma plasma generator ozone installed on an air filter. Engine performance testing includes engine power and torque using a 50L super dyno type dynamometer chassis. The test results showed, with ozone generator engine torque increased from 0 ”“ 0.5 Nm and increased engine power from 0 ”“ 0.4 KW compared to without using an ozone generator. Nevertheless, the use of ozone (O3) at a high equivalent ratio can lead to knocking
Keywords
Ozone generator; Engine power; Engine torqueReferences
- Avadhanulu, M.N. (1992) A Textbook Of Engineering Physics For B.E., B.Sc. (Engg.). S Chand & Co Ltd. Available at: http://books.google.com/books?id=lTUNWOR_cDgC&pgis=1.
- Bert Hickman (2018) konsep ozon generator, Qoura. Available at: https://www.quora.com/What-is-the-best-ozone-generator. https://www.quora.com/What-is-the-best-ozone-generator.
- Biswas, S. and Ekoto, I. (2019) ‘Detailed investigation into the effect of ozone addition on spark assisted compression ignition engine performance and emissions characteristics’, SAE Technical Papers, 2019-April(April). doi:10.4271/2019-01-0966.
- Ibnu, S. (2015) ‘The Improvement of Motorcycles Performance using CDI Programmable’, Jurnal Science Tech, 1(1), pp. 59–67.
- Ji, S. et al. (2017) ‘Influence of Ozone on Ignition and Combustion Performance of a Lean Methane/Air Mixture’, Energy and Fuels, 31(12), pp. 14191–14200. doi:10.1021/acs.-energyfuels.7b02389.
- Kementrian LHK (2021) Uji Emisi Kendaraan, kementrian lingkungan hidup&kehutanan. Available at: https://www.menlhk.go.id/site/single_post/4078 (Accessed: 8 June 2021).
- M Ivan Mahdi. (2022) Jumlah Kendaraan Bermotor di 8 Provinsi Ini Paling Sedikit, Dataindonesia.id. Available at: https://dataindonesia.id/sektor-riil/detail/jumlah-kendaraan-bermotor-di-8-provinsi-ini-paling-sedikit (Accessed: 30 March 2022).
- Masurier, J.B. et al. (2015) ‘Ozone applied to the homogeneous charge compression ignition engine to control alcohol fuels combustion’, Applied Energy, 160, pp. 566–580. doi:10.1016-/j.apenergy.2015.08.004.
- Rahardjo Tirtoatmodjo and Ekadewi Anggraini Handoyo (2018) ‘Peningkatan Performance Dengan Pendingin Udara Masuk Pada Motor Diesel 4Ja1’, Jurnal Teknik Mesin, 2(1), pp. 1–6. Available at: http://puslit2.petra.ac.id/ejournal/index.php/mes/article/view/15912.
- Sasongko, A. (2015) ‘Analisis Performa Mesin Terhadap Daya Dan Torsi’, Khatulistiwa Informatika, 3(2), pp. 124–133.
- Shakhashiri (2017) ‘Nitrogen oxides’, Naika. Internal medicine, 27(5), pp. 827–832. doi:10.1016/0004-6981(78)90338-4.
- Sulistiyono, A. et al. (2019) ‘Studi Profil Ozone Permukaan (O3) Dan Gas Monoksida (CO) Antara Kota Bandung Dan Bukit Kototabang’, Jurnal Ilmu Lingkungan, 17(2), p. 239. doi:10.14710-/jil.17.2.239-244.
- Syafarudin, A. and Novia (2013) ‘Produksi Ozon dengan Bahan Baku Oksigen Menggunakan Alat Ozon Generator’, Jurnal Teknik Kimia, 19(2), pp. 1–9.
- Teknik, A. et al. (2020) ‘Pemanfaatan Panas Radiator Untuk Memperbaiki Proses Pembakaran Mesin Bensin’.
- Triawanto, Y. (2016) ‘Pengaruh Variasi Topologi Elektroda terhadap Kadar Ozon yang dihasilkan oleh Generator Ozon’, pp. 47–49.
- Verda Nano Setiawan (2021) Konsumsi BBM Masyarakat dan Industri Meningkat Imbas Pelonggaran PPKM, Katadata.co.id. Available at: https://katadata.co.id/rezzaaji/berita-/61776d156db13-/konsumsi-bbm-masyarakat-dan-industri-meningkat-imbas-pelonggaran-ppkm.
Most read articles by the same author(s)
- Ayub Answary, Budi Waluyo, Model Age Replacement untuk Preventive Maintenance Pompa Finish Water Pump : Studi Kasus di Perusahaan Daerah Air Minum (PDAM) , Borobudur Engineering Review: Vol. 4 No. 01 (2024): Automatic control system
- Bagiyo Condro Purnomo Condro Purnomo, Muhammad Farhan Aulia Rahman, Wahyu Biantoro, Budi Waluyo, Experimental Research on the Effect of CVT Roller and Spring Parameters on Metic Motorcycle Performance , Borobudur Engineering Review: Vol. 3 No. 2 (2023): Industrial product applications
- Toni Yunus, Yusuf Surya Saputra, Budi Waluyo, Penambahan Bio-Aditif Minyak Sereh Untuk Meningkatkan Kinerja Campuran Pertalite-Etanol: Addition of Citronella Oil Bio-Additive to Improve the Performance of Pertalite-Ethanol Mixture , Borobudur Engineering Review: Vol. 4 No. 2 (2024): Aplikasi Teknologi Industri
- Muhammail Muhammail, Saifudin Saifudin, Ilham Habibi, Pengaruh Interpass-temperature pada Pengelasan SMAW Terhadap Deformasi dan Kekuatan Impak Baja ASTM A36 , Borobudur Engineering Review: Vol. 4 No. 01 (2024): Automatic control system
- Iftikar Flour Nadhif, Budi Waluyo, Produksi Bahan Bakar Padat Terbarukan Berdasarkan Kajian Torefaksi Limbah Kulit Ketela Berbasis Gelombang Mikro: Renewable Solid Fuel Production Based on Microwave-Based Cassava Peel Waste Torrefaction Study , Borobudur Engineering Review: Vol. 4 No. 2 (2024): Aplikasi Teknologi Industri
- Argi Ananda Wardana, Diky Eryanto, Farika Tono Putri, Ragil Tri Indrawati, Saifudin Saifudin, Suroto Munahar, Desain Opacity Meter dengan Image Processing Berdasarkan Risk Based Measurement , Borobudur Engineering Review: Vol. 2 No. 1 (2022): Industrial Engineering and Emission Control