Article Sidebar

Download
PDF
Statistic
Read Counter : 960 Download : 761

Downloads

Download data is not yet available.

Main Article Content

Abstract

Artikel ini menyajikan pengaruh modifikasi cam dan aplikasi roller rocker arm terhadap torsi, daya, dan emisi gas buang sepeda motor. Pengujian torsi dan daya dilakukan dengan dynamometer tipe Rextor Pro Dyno dan pengujian emisi dilakukan dengan engine gas analyzer tipe Heshbon HG-510. Obyek penelitian adalah sepeda motor Yamaha 5D9. Hasil penelitian menunjukan bahwa penggunaan cam modifikasi dan roller rocker arm berpengaruh pada peningkatan torsi sebesar 0,04 Nm dan daya 3,4 kW. Namun demikian, penggunaan cam modifikasi dan roller rocker arm ini sedikit meningkatkan emisi CO dan HC.


 

Article Details

Author Biography

Bahtiar Wilantara, Politeknik Dharma Patria Kebumen, Indonesia

Academic profile: ORCID; Google Scholar; Sinta

References

  1. S. M. Husain and S. Sheikh, “Design and Analysis of Rocker ARM,” International Journal of Mechanical Engineering and Robotics Researc, vol. 02, no. 3, pp. 191–197, 2016.
  2. V. R. Magdum, S. H. Sawant, P. G. Student, M. Engineering, and J. J. M. College, “An Overview of Design and Analysis of Rocker Arm,” International Research Journal of Engineering and Technology(IRJET), vol. 4, no. 7, pp. 2499–2501, 2017.
  3. S. M. Husain and S. Sheikh, “Rocker Arm : - a Review,” International Journal of Innovative Research in Science, Engineering and Technology, vol. 2, no. 4, pp. 1120–1126, 2013.
  4. G. P. Garage, “How to read a cam spec card.” [Online].Available: http://garage.grumpysperformance.com/index.php?threads/how-to-read-a-cam-spec-card.1477/.
  5. Y.-L. Lee, J. Pan, R. B. Hathaway, M. E. Barkey, and D. Taylor, “Stress-based analysis fatigue an d design,” Fatigue Testing and Analysis, pp. 103–180, 2005.
  6. A. E. Fredericksen and R. D. Richtmeyer, “Needle Bearing Rocker Arm Assembly,” US4878463A, 1989.
  7. A. W. Hayman, R. S. McAlpine, and E. C. Douse, “High Performance Overhead Valvetrain Assembly,” US007878168B2 (12), 2011.
  8. H. K. Muhajir, A. A. P. Susastriawan, M. H. N. Aziz, and P. T. D. Rompas, “Pengaruh Variasi Tinggi Lift, Lobe Separation Angle Camshaft, dan Roller Rocker Arm Terhadap Unjuk Kerja Motor Bensin Empat Langkah,” Frontiers: Jurnal Sains Dan Teknologi, vol. 1, no. 1, pp. 7–16, 2018.
  9. P. Kubiak, K. Siczek, and K. Siczek, “the Analysis of Friction in the Bearing of Rocker Arms,” Journal of KONES. Powertrain and Transport, vol. 23, no. 2, pp. 231–238, 2016.
  10. F. I. Darmawangsa, “Analisis Pengaruh Penambahan Durasi Camshaft Terhadap Unjuk Kerja Dan Emisi Gas Buang Pada Engine Sinjai 650 Cc,” Jurnal Teknik ITS, vol. 5, no. 1, 2019.
  11. M. S. Al-Khaldi, M. K. A. Ariffin, S. Sulaiman, B. T. H. T. Baharudin, and N. Abdul Aziz, “Determination of optimum valve opening and height in the automotive engine,” ARPN Journal of Engineering and Applied Sciences, vol. 11, no. 1, pp. 190–194, 2016.
  12. C. Park, W. Park, Y. Kim, Y. Choi, and B. Lim, “Effect of Valve Timing and Excess Air Ratio on Torque in Hydrogen-Fueled Internal Combustion Engine for UAV,” Energies, vol. 12, no. 5, p. 771, 2019.
  13. A. A. Sabaruddin, S. Wiriadidjaja, A. S. Mohd Rafie, F. I. Romli, and H. Djojodihardjo, “Engine optimization by using variable valve timing system at low engine revolution,” ARPN Journal of Engineering and Applied Sciences, vol. 10, no. 20, pp. 9730–9735, 2015.