Article Sidebar

Download
PDF
Statistic
Read Counter : 320 Download : 256

Downloads

Download data is not yet available.

Main Article Content

Abstract

Nyamplung (Calophyllum Inophyllum) is an environmentally friendly alternative fuel that can be used to replace the consumption of fossil fuels. The purpose of this experiment was to analyze the effect of magnetic fields on the premixed flame of biodiesel from Calophyllum Inophyllum, the experiments were carried out on a bunsen burner. Fuel evaporation uses a temperature of 473 K and the equivalent ratio used is between ϕ 0.7; 0.8; 0.9; 1.0; 1.1 and 1.2. This experiment used a modified magnet that has magnetic force in 11.000 gausses with magnetic variations N-S, S-N, N-N, and S-S. Experiments revealed that magnetic fields have a significant effect to increase the value of laminar flame speed on magnetic variations point at S-S 3.8%; N-N 4.8%; S-N 17.09%, and the highest laminar flame speed were at point N-S 20.7%. The enhancement value of laminar flame speed indicated more optimum combustion processes. The magnetic fields can influence the O2, and H2O and change the orientation of the hydrocarbons which makes it easier for O2 and fuel to carry out the oxidation process, resulting in more optimal combustion.

Keywords

Biodiesel Premixed flame speed Magnetic fields Bunsen burner

Article Details

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

References

  1. I. S. A. Manaf et al., “A review for key challenges of the development of biodiesel industry,” Energy Conversion and Management, vol. 185, no. November 2018, pp. 508–517, 2019, doi: 10.1016/j.enconman.2019.02.019.
  2. H. M. Mahmudul, F. Y. Hagos, R. Mamat, A. A. Adam, W. F. W. Ishak, and R. Alenezi, “Production, characterization and performance of biodiesel as an alternative fuel in diesel engines – A review,” Renewable and Sustainable Energy Reviews, vol. 72, no. April 2016, pp. 497–509, 2017, doi: 10.1016/j.rser.2017.01.001.
  3. S. M. N. Rahayu et al., “A Review of automotive green technology: Potential of butanol as biofuel in gasoline engine,” Mechanical Engineering for Society and Industry, vol. 2, no. 2, pp. 82–97, 2022.
  4. A. Kolakoti, B. Prasadarao, K. Satyanarayana, M. Setiyo, H. Köten, and M. Raghu, “Elemental, Thermal and Physicochemical Investigation of Novel Biodiesel from Wodyetia Bifurcata and Its Properties Optimization using Artificial Neural Network (ANN),” Automotive Experiences, vol. 5, no. 1, pp. 3–15, 2022, doi: 10.31603/ae.6171.
  5. A. Kolakoti, M. Setiyo, and B. Waluyo, “Biodiesel Production from Waste Cooking Oil: Characterization, Modeling and Optimization,” Mechanical Engineering for Society and Industry, vol. 1, no. 1, pp. 22–30, 2021, doi: 10.31603/mesi.5320.
  6. F. Yaşar, “Comparision of fuel properties of biodiesel fuels produced from different oils to determine the most suitable feedstock type,” Fuel, vol. 264, p. 116817, 2020, doi: Renewable and Sustainable Green Diesel (D100) for Achieving Net Zero Emission in Indonesia Transportation Sector.
  7. I. C. Setiawan and M. Setiyo, “Renewable and Sustainable Green Diesel (D100) for Achieving Net Zero Emission in Indonesia Transportation Sector,” Automotive Experiences, vol. 5, no. 1, pp. 1–2, 2022, doi: 10.31603/ae.6895.
  8. M. Setiyo, D. Yuvenda, and O. D. Samuel, “The Concise Latest Report on the Advantages and Disadvantages of Pure Biodiesel (B100) on Engine Performance: Literature Review and Bibliometric Analysis,” Indonesian Journal of Science and Technology, vol. 6, no. 3, pp. 469–490, 2021, doi: 10.17509/ijost.v6i3.38430.
  9. S. Pambudi, N. Ilminnafik, S. Junus, and M. N. Kustanto, “Experimental Study on the Effect of Nano Additives γAl2O3 and Equivalence Ratio to Bunsen Flame Characteristic of Biodiesel from Nyamplung (Calophyllum Inophyllum),” Automotive Experiences, vol. 4, no. 2, pp. 51–61, 2021, doi: 10.31603/ae.4569.
  10. H. C. Ong et al., “Biodiesel production from Calophyllum inophyllum-Ceiba pentandra oil mixture: Optimization and characterization,” Journal of Cleaner Production, vol. 219, pp. 183–198, May 2019, doi: 10.1016/j.jclepro.2019.02.048.
  11. H. C. Ong, H. H. Masjuki, T. M. I. Mahlia, A. S. Silitonga, W. T. Chong, and K. Y. Leong, “Optimization of biodiesel production and engine performance from high free fatty acid Calophyllum inophyllum oil in CI diesel engine,” Energy Conversion and Management, vol. 81, pp. 30–40, 2014, doi: 10.1016/j.enconman.2014.01.065.
  12. I. W. Muderawan and N. K. P. Daiwataningsih, “Pembuatan Biodesel dari Minyak Nyamplung (Calophyllum Inophylum L,) dan Analisis Metil Esternya dengan GC-MS,” in Prosiding Seminar Nasional MIPA, 2016, pp. 324–331.
  13. B. Ashok, K. Nanthagopal, V. Anand, K. M. Aravind, A. K. Jeevanantham, and S. Balusamy, “Effects of n-octanol as a fuel blend with biodiesel on diesel engine characteristics,” Fuel, vol. 235, no. August 2017, pp. 363–373, 2019, doi: 10.1016/j.fuel.2018.07.126.
  14. K. Nanthagopal, B. Ashok, A. Tamilarasu, A. Johny, and A. Mohan, “Influence on the effect of zinc oxide and titanium dioxide nanoparticles as an additive with Calophyllum inophyllum methyl ester in a CI engine,” Energy Conversion and Management, vol. 146, pp. 8–19, 2017, doi: 10.1016/j.enconman.2017.05.021.
  15. H. Liu, X. Ma, B. Li, L. Chen, Z. Wang, and J. Wang, “Combustion and emission characteristics of a direct injection diesel engine fueled with biodiesel and PODE/biodiesel fuel blends,” Fuel, vol. 209, pp. 62–68, 2017, doi: 10.1016/j.fuel.2017.07.066.
  16. H. C. Ong, H. H. Masjuki, T. M. I. Mahlia, A. S. Silitonga, W. T. Chong, and T. Yusaf, “Engine performance and emissions using Jatropha curcas, Ceiba pentandra and Calophyllum inophyllum biodiesel in a CI diesel engine,” Energy, vol. 69, pp. 427–445, May 2014, doi: 10.1016/j.energy.2014.03.035.
  17. M. S. Shehata, “Emissions, performance and cylinder pressure of diesel engine fuelled by biodiesel fuel,” Fuel, vol. 112, no. X, pp. 513–522, 2013, doi: 10.1016/j.fuel.2013.02.056.
  18. A. Bhikuning, “The simulation of performance and emissions from rapeseed and soybean methyl ester in different injection pressures,” Automotive Experiences, vol. 4, no. 3, pp. 112–118, 2021, doi: 10.31603/ae.4682.
  19. F. Sundus, M. A. Fazal, and H. H. Masjuki, “Tribology with biodiesel: A study on enhancing biodiesel stability and its fuel properties,” Renewable and Sustainable Energy Reviews, vol. 70, no. November 2016, pp. 399–412, 2017, doi: 10.1016/j.rser.2016.11.217.
  20. A. C. Arifin, A. Aminudin, and R. M. Putra, “Diesel-Biodiesel Blend on Engine Performance: An Experimental Study,” Automotive Experiences, vol. 2, no. 3, pp. 91–96, 2019, doi: 10.31603/ae.v2i3.2995.
  21. H. Venu and V. Madhavan, “Effect of Al2O3 nanoparticles in biodiesel-diesel-ethanol blends at various injection strategies: Performance, combustion and emission characteristics,” Fuel, vol. 186, pp. 176–189, 2016, doi: 10.1016/j.fuel.2016.08.046.
  22. A. T. Hoang and V. Van Le, “The performance of a diesel engine fueled with diesel oil, biodiesel and preheated coconut oil,” International Journal of Renewable Energy Development, vol. 6, no. 1, pp. 1–7, 2017, doi: 10.14710/ijred.6.1.1-7.
  23. H. Köten and A. S. Parlakyiğit, “Effects of the diesel engine parameters on the ignition delay,” Fuel, vol. 216, no. August 2017, pp. 23–28, 2018, doi: 10.1016/j.fuel.2017.11.136.
  24. R. Saputra Nursal, A. Khalid, I. Shahridzuan Abdullah, N. Jaat, N. Darlis, and H. Koten, “Autoignition behavior and emission of biodiesel from palm oil, waste cooking oil, tyre pyrolysis oil, algae and jatropha,” Fuel, vol. 306, no. April, p. 121695, 2021, doi: 10.1016/j.fuel.2021.121695.
  25. I. Shahridzuan Abdullah, A. Khalid, N. Jaat, R. Saputra Nursal, H. Koten, and Y. Karagoz, “A study of ignition delay, combustion process and emissions in a high ambient temperature of diesel combustion,” Fuel, vol. 297, no. April, p. 120706, 2021, doi: 10.1016/j.fuel.2021.120706.
  26. S. Thiyagarajan, V. Edwin Geo, L. J. Martin, and B. Nagalingam, “Comparative analysis of various methods to reduce CO2 emission in a biodiesel fueled CI engine,” Fuel, vol. 253, pp. 146–158, Oct. 2019, doi: 10.1016/j.fuel.2019.04.163.
  27. P. M. Patel, G. P. Rathod, and T. M. Patel, “Performance and Emission Analysis of Single Cylinder Diesel Engine under the influence of Magnetic Fuel Energizer,” IOSR Journal of Mechanical and Civil Engineering, vol. 11, no. 2, pp. 34–39, 2014, doi: 10.9790/1684-11283439.
  28. R. R. Sahoo and A. Jain, “Experimental analysis of nanofuel additives with magnetic fuel conditioning for diesel engine performance and emissions,” Fuel, vol. 236, no. September 2018, pp. 365–372, 2019, doi: 10.1016/j.fuel.2018.09.027.
  29. P. V. Kumar, S. K. Patro, and V. Pudi, “Experimental study of a novel magnetic fuel ionization method in four stroke diesel engines,” International Journal of Mechanical Engineering and Robotics Research, vol. 3, no. 1, pp. 151–159, 2014.
  30. J. Wang et al., “Effects of stretch and preferential diffusion on tip opening of laminar premixed Bunsen flames of syngas/air mixtures,” Fuel, vol. 148, pp. 1–8, 2015, doi: 10.1016/j.fuel.2015.01.078.
  31. Z. L. Wei, C. W. Leung, C. S. Cheung, and Z. H. Huang, “Effects of H2 and CO2 addition on the heat transfer characteristics of laminar premixed biogas–hydrogen Bunsen flame,” International Journal of Heat and Mass Transfer, vol. 98, pp. 359–366, 2016, doi: 10.1016/j.ijheatmasstransfer.2016.02.064.
  32. S. Hu et al., “Assessment of uncertainties of laminar flame speed of premixed flames as determined using a Bunsen burner at varying pressures,” Applied Energy, vol. 227, no. October 2017, pp. 149–158, 2018, doi: 10.1016/j.apenergy.2017.09.083.
  33. R. V. Andrade et al., “Assessment of laminar flame velocity of producer gas from biomass gasification using the Bunsen burner method,” International Journal of Hydrogen Energy, vol. 45, no. 20, pp. 11559–11568, 2020, doi: 10.1016/j.ijhydene.2020.02.082.
  34. W. Wenchao, L. Fashe, and L. Ying, “Effect of biodiesel ester structure optimization on low temperature performance and oxidation stability,” Journal of Materials Research and Technology, vol. 9, no. 3, pp. 2727–2736, 2020, doi: 10.1016/j.jmrt.2020.01.005.
  35. Y. Wu, B. Rossow, V. Modica, X. Yu, L. Wu, and F. Grisch, “Laminar flame speed of lignocellulosic biomass-derived oxygenates and blends of gasoline/oxygenates,” Fuel, vol. 202, pp. 572–582, 2017, doi: 10.1016/j.fuel.2017.04.085.
  36. N. Bouvet, C. Chauveau, I. Gökalp, S. Y. Lee, and R. J. Santoro, “Characterization of syngas laminar flames using the Bunsen burner configuration,” International Journal of Hydrogen Energy, vol. 36, no. 1, pp. 992–1005, 2011, doi: 10.1016/j.ijhydene.2010.08.147.
  37. I. K. G. Wirawan, I. N. G. Wardana, R. Soenoko, and S. Wahyudi, “Premixed Combustion of Coconut Oil on Perforated Burner,” Journal of Renewable Energy Development, vol. 2, no. 3, pp. 133–139, 2013, doi: 10.14710/ijred.2.3.133-139.
  38. D. Perdana, L. Yuliati, N. Hamidi, and I. N. G. Wardana, “The Role of Magnetic Field Orientation in Vegetable Oil Premixed Combustion,” Journal of Combustion, vol. 2020, 2020, doi: 10.1155/2020/2145353.
  39. Y. Wu, V. Modica, B. Rossow, and F. Grisch, “Effects of pressure and preheating temperature on the laminar flame speed of methane/air and acetone/air mixtures,” Fuel, vol. 185, pp. 577–588, 2016, doi: 10.1016/j.fuel.2016.07.110.
  40. Y. Al Ali, M. Hrairi, and I. Al Kattan, “Potential for improving vehicle fuel efficiency and reducing the environmental pollution via fuel ionization,” International Journal of Environmental Science and Technology, vol. 9, no. 3, pp. 495–502, 2012, doi: 10.1007/s13762-012-0053-7.
  41. D. Perdana, S. Adiwidodo, M. Choifin, and W. A. Winarko, “The effect of magnetic field variations in a mixture of coconut oil and jatropha on flame stability and characteristics on the premixed combustion,” EUREKA: Physics and Engineering, vol. 7, no. 5, pp. 13–22, 2021, doi: 10.21303/2461-4262.2021.001996.
  42. D. C. Uguru-Okorie, “Combustion Enhancers in Diesel Engines: Magnetic Field Option,” IOSR Journal of Mechanical and Civil Engineering, vol. 5, no. 5, pp. 21–24, 2013, doi: 10.9790/1684-0552124.
  43. A. S. Faris et al., “Effects of magnetic field on fuel consumption and exhaust emissions in two-stroke engine,” in Energy Procedia, 2012, vol. 18, pp. 327–338, doi: 10.1016/j.egypro.2012.05.044.
  44. F. A. El Fatih and G. M. Saber, “Effect of fuel magnetism on engine performance and emissions,” Australian Journal of Basic and Applied Sciences, vol. 4, no. 12, pp. 6354–6358, 2010.