Mechanical Engineering for Society and Industry

Articles

Advanced deep drawing methods, challenges, and future scope - A Review

C. Jai Shiva Rao , K. Prasanna Lakshmi , M. Venkata Ramana , Jalumedi Babu

Published
December 30, 2024

Vol. 4 No. 3 (2024): Special Issue on Technology Update 2024
Pages 490-512

DOI

Open Access
Share

Abstract

One of the important metal forming techniques employed in forming processes of sheet metal is deep drawing. This method allows to production of intricate shapes with fewer flaws. The quality of the deep-drawn product depends on the extent of control, exercised by the manufacturer, on process parameters of deep drawing. An effective end product with the least possible flaws can be manufactured using a deep drawing process by effectively controlling the process parameters. This article brings out a consolidated report of the research findings, as reported by researchers across the globe, on recent developments of deep drawing methods with emphasis on the quality of deep drawn products. These methods include hydromechanical deep drawing, micro deep drawing, and deep drawing operation using magnet-rheological medium. This paper also presents challenges and scope of future research leading to commercial implementation of recently developed techniques of deep drawing. 

Keywords

Deep drawing; Magnetorheological fluids; Hydro mechanical deep drawing; Micro deep drawing; Size effects

References

  1. [1] A. C. S. Reddy, S. Rajesham, P. R. Reddy, T. P. Kumar, and J. Goverdhan, “An experimental study on effect of process parameters in deep drawing using Taguchi technique,” International Journal of Engineering, Science and Technology, vol. 7, no. 1, pp. 21–32, Jan. 1970, doi: 10.4314/ijest.v7i1.3.
  2. [2] T. Altan, Metal Forming Handbook, no. 5. Springer Verlag Berlin, 1998.
  3. [3] A. C. Reardon, Metallurgy for the Non-metallurgist. Asm International, 2011.
  4. [4] K. Khoirudin et al., “A Report on Metal Forming Technology Transfer from Expert to Industry for Improving Production Efficiency,” Mechanical Engineering for Society and Industry, vol. 1, no. 2, pp. 96–103, Nov. 2021, doi: 10.31603/mesi.5613.
  5. [5] K. Karyadi et al., “The Square cup deep drawing: Technology transfer from experts to increase production in small and medium enterprise (SME) groups,” Mechanical Engineering for Society and Industry, vol. 4, no. 1, pp. 38–49, Apr. 2024, doi: 10.31603/mesi.10298.
  6. [6] A. C. S. Reddy, S. Rajesham, P. R. Reddy, and A. C. Umamaheswar, “Formability: A review on different sheet metal tests for formability,” in International Conference on Multifunctional Materials (ICMM-2019), 2020, p. 030026, doi: 10.1063/5.0019536.
  7. [7] F. Vollertsen, Z. Hu, H. S. Niehoff, and C. Theiler, “State of the art in micro forming and investigations into micro deep drawing,” Journal of Materials Processing Technology, vol. 151, no. 1–3, pp. 70–79, Sep. 2004, doi: 10.1016/j.jmatprotec.2004.04.266.
  8. [8] V. L. Hattalli and S. R. Srivatsa, “Sheet Metal Forming Processes – Recent Technological Advances,” Materials Today: Proceedings, vol. 5, no. 1, pp. 2564–2574, 2018, doi: 10.1016/j.matpr.2017.11.040.
  9. [9] L. Dalong, L. Yanting, Y. Enlin, H. Yi, and L. Feng, “Theoretical and experimental study of the drawing force under a current pulse,” The International Journal of Advanced Manufacturing Technology, vol. 97, no. 1–4, pp. 1047–1051, Jul. 2018, doi: 10.1007/s00170-018-1896-y.
  10. [10] N. Becker, K. Pöhlandt, and K. Lange, “Improvement of the Plane-Strain Compression Test for Determining Flow Curves,” CIRP Annals, vol. 38, no. 1, pp. 227–230, 1989, doi: 10.1016/S0007-8506(07)62691-2.
  11. [11] D. Singh, R. Yousefi, and M. Boroushaki, “Identification of optimum parameters of deep drawing of a cylindrical workpiece using neural network and genetic algorithm,” World Academy of Science, Engineering and Technology, vol. 5, no. 6, pp. 211–217, 2011.
  12. [12] L. Lang, J. Danckert, and K. B. Nielsen, “Investigation into hydrodynamic deep drawing assisted by radial pressure,” Journal of Materials Processing Technology, vol. 148, no. 1, pp. 119–131, May 2004, doi: 10.1016/j.jmatprotec.2004.01.053.
  13. [13] A. Fazli and B. M. Dariani, “Parameter study of the axisymmetric hydromechanical deep drawing process,” Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, vol. 220, no. 12, pp. 1937–1944, Dec. 2006, doi: 10.1243/09544054JEM672.
  14. [14] H. D. Azodi, H. Moslemi Naeini, M. H. Parsa, and G. H. Liaghat, “Analysis of rupture instability in the hydromechanical deep drawing of cylindrical cups,” The International Journal of Advanced Manufacturing Technology, vol. 39, no. 7–8, pp. 734–743, Nov. 2008, doi: 10.1007/s00170-007-1262-y.
  15. [15] H. Choi, M. Koç, and J. Ni, “A study on the analytical modeling for warm hydro-mechanical deep drawing of lightweight materials,” International Journal of Machine Tools and Manufacture, vol. 47, no. 11, pp. 1752–1766, Sep. 2007, doi: 10.1016/j.ijmachtools.2006.12.005.
  16. [16] F. Rahmani, S. J. Hashemi, H. Moslemi Naeini, and H. Deylami Azodi, “Numerical and Experimental Study of the Efficient Parameters on Hydromechanical Deep Drawing of Square Parts,” Journal of Materials Engineering and Performance, vol. 22, no. 2, pp. 338–344, Feb. 2013, doi: 10.1007/s11665-012-0301-5.
  17. [17] L. Lang, J. Danckert, and K. B. Nielsen, “Multi-layer sheet hydroforming: Experimental and numerical investigation into the very thin layer in the middle,” Journal of Materials Processing Technology, vol. 170, no. 3, pp. 524–535, Dec. 2005, doi: 10.1016/j.jmatprotec.2005.06.033.
  18. [18] H. Tseng, Z. Wu, C. Hung, M. Lee, and C. Huang, “Investigation of Optimum Process Parameters on the Sheet Hydroforming of Titanium / Aluminum Clad Metal for Battery Housing,” 2009.
  19. [19] S. Bagherzadeh, B. Mollaei-Dariani, and K. Malekzadeh, “Theoretical study on hydro-mechanical deep drawing process of bimetallic sheets and experimental observations,” Journal of Materials Processing Technology, vol. 212, no. 9, pp. 1840–1849, Sep. 2012, doi: 10.1016/j.jmatprotec.2012.04.002.
  20. [20] S. Bagherzadeh, M. J. Mirnia, and B. Mollaei Dariani, “Numerical and experimental investigations of hydro-mechanical deep drawing process of laminated aluminum/steel sheets,” Journal of Manufacturing Processes, vol. 18, pp. 131–140, Apr. 2015, doi: 10.1016/j.jmapro.2015.03.004.
  21. [21] Y.-Z. Chen, W. Liu, Y.-C. Xu, and S.-J. Yuan, “Analysis and experiment on wrinkling suppression for hydroforming of curved surface shell,” International Journal of Mechanical Sciences, vol. 104, pp. 112–125, Dec. 2015, doi: 10.1016/j.ijmecsci.2015.10.002.
  22. [22] W. Liu, Y. Xu, and S. Yuan, “Effect of Pre-bulging on Wrinkling of Curved Surface Part by Hydromechanical Deep Drawing,” Procedia Engineering, vol. 81, pp. 914–920, 2014, doi: 10.1016/j.proeng.2014.10.117.
  23. [23] W. Liu, Y.-Z. Chen, Y.-C. Xu, and S.-J. Yuan, “Enhancement on plastic deformation of curved surface shell by sheet hydroforming with optimized pre-bulging process,” The International Journal of Advanced Manufacturing Technology, vol. 97, no. 9–12, pp. 4145–4156, Aug. 2018, doi: 10.1007/s00170-018-2185-5.
  24. [24] W. D. Li, B. Meng, C. Wang, M. Wan, and L. Xu, “Effect of pre-forming and pressure path on deformation behavior in multi-pass hydrodynamic deep drawing process,” International Journal of Mechanical Sciences, vol. 121, pp. 171–180, Feb. 2017, doi: 10.1016/j.ijmecsci.2017.01.010.
  25. [25] L. H. Lang and Q. Da Zhang, “Influence Law of Initial Reverse Bulging on Sheet Hydroforming Process,” Key Engineering Materials, vol. 746, pp. 99–107, Jul. 2017, doi: 10.4028/www.scientific.net/KEM.746.99.
  26. [26] Y. Z. Chen, W. Liu, Z. C. Zhang, Y. C. Xu, and S. J. Yuan, “Analysis of wrinkling during sheet hydroforming of curved surface shell considering reverse bulging effect,” International Journal of Mechanical Sciences, vol. 120, pp. 70–80, Jan. 2017, doi: 10.1016/j.ijmecsci.2016.10.023.
  27. [27] S. Yuan, “New Development on Technology and Equipment of Sheet Hydroforming,” Journal of Mechanical Engineering, vol. 51, no. 8, p. 20, 2015, doi: 10.3901/JME.2015.08.020.
  28. [28] L. Lang, Y. Wang, Y. Xie, X. Yang, and Y. Xu, “Pre-bulging effect during sheet hydroforming process of aluminum alloy box with unequal height and flat bottom,” Transactions of Nonferrous Metals Society of China, vol. 22, pp. s302–s308, Dec. 2012, doi: 10.1016/S1003-6326(12)61723-3.
  29. [29] B.-G. Chen and Y.-C. Xu, “Influence of pre-bulging on deformation and hardness of dual-phase steel cylindrical cup by hydrodynamic deep drawing process,” Cailiao Kexue Yu Gongyi, vol. 19, no. 1, pp. 17–20, 2011.
  30. [30] Yong Zhao, Ri-Qing Lv, Hao Li, and Qi Wang, “Simulation and Experimental Measurement of Magnetic Fluid Transmission Characteristics Subjected to the Magnetic Field,” IEEE Transactions on Magnetics, vol. 50, no. 5, pp. 1–7, May 2014, doi: 10.1109/TMAG.2013.2288228.
  31. [31] S. Rösel and M. Merklein, “Improving formability due to an enhancement of sealing limits caused by using a smart fluid as active fluid medium for hydroforming,” Production Engineering, vol. 8, no. 1–2, pp. 7–15, Mar. 2014, doi: 10.1007/s11740-013-0496-9.
  32. [32] Z. J. Wang and P. Y. Wang, “Application of Magnetorheological Fluid in Bulge Tests of Sheet Metal,” Advanced Materials Research, vol. 873, pp. 82–90, Dec. 2013, doi: 10.4028/www.scientific.net/AMR.873.82.
  33. [33] Z. Wang, N. Xiang, P. Wang, and Z. Li, “Property-adjustable forming medium induced extension of sheet metal formability under variable magnetic field,” Journal of Materials Processing Technology, vol. 243, pp. 420–432, May 2017, doi: 10.1016/j.jmatprotec.2017.01.002.
  34. [34] P. Wang, Z. Wang, N. Xiang, and Z. Li, “Investigation on changing loading path in sheet metal forming by applying a property-adjustable flexible-die,” Journal of Manufacturing Processes, vol. 53, pp. 364–375, May 2020, doi: 10.1016/j.jmapro.2020.03.033.
  35. [35] P. Wang, Z. Wang, N. Xiang, S. Cai, and Z. Li, “Mechanism of magnetic field condition on deformation behavior of sheet metal using a property-adjustable flexible-die,” The International Journal of Advanced Manufacturing Technology, vol. 109, no. 3–4, pp. 629–644, Jul. 2020, doi: 10.1007/s00170-020-05712-0.
  36. [36] T. Wen, Z. S. Zhang, M. Zhang, and J. Hu, “Precision bending of thin-walled tubes based on inserted magnetic rheological particles as infill,” J Huazhong Univ Sci Technol, vol. 46, no. 7, pp. 63–66, 2018.
  37. [37] F. Li, P. Xu, X. Sui, and F. Zhou, “Investigation of a New Method for Sheet Deep Drawing Based on the Pressure of Magnetic Medium,” Matreial Transactions, vol. 56, no. 6, pp. 781–784, 2015, doi: 10.2320/matertrans.M2014437.
  38. [38] Y. Y. Mu, F. Li, C. Li, Y. Q. Zang, and J. Xu, “Mechanism of pre-deformation effect on sheet deep-drawing forming under magnetic field condition using a magnetorheological fluid (MRF) medium,” The International Journal of Advanced Manufacturing Technology, vol. 116, no. 3–4, pp. 863–875, Sep. 2021, doi: 10.1007/s00170-021-07481-w.
  39. [39] J. Zhao, M. Huo, X. Ma, F. Jia, and Z. Jiang, “Study on edge cracking of copper foils in micro rolling,” Materials Science and Engineering: A, vol. 747, pp. 53–62, Feb. 2019, doi: 10.1016/j.msea.2019.01.048.
  40. [40] C. J. Wang et al., “Research on micro-deep drawing process of concial part with ultra-thin copper foil using multi-layered DLC film-coated die,” The International Journal of Advanced Manufacturing Technology, vol. 100, no. 1–4, pp. 569–575, Jan. 2019, doi: 10.1007/s00170-018-2757-4.
  41. [41] Z. Jiang et al., “Influences of temperature and grain size on the material deformability in microforming process,” International Journal of Material Forming, vol. 10, no. 5, pp. 753–764, Oct. 2017, doi: 10.1007/s12289-016-1317-4.
  42. [42] M. W. Fu, J. L. Wang, and A. M. Korsunsky, “A review of geometrical and microstructural size effects in micro-scale deformation processing of metallic alloy components,” International Journal of Machine Tools and Manufacture, vol. 109, pp. 94–125, Oct. 2016, doi: 10.1016/j.ijmachtools.2016.07.006.
  43. [43] F. Gong, Z. Yang, Q. Chen, Z. Xie, D. Shu, and J. Yang, “Influences of lubrication conditions and blank holder force on micro deep drawing of C1100 micro conical–cylindrical cup,” Precision Engineering, vol. 42, pp. 224–230, Oct. 2015, doi: 10.1016/j.precisioneng.2015.05.004.
  44. [44] A. Molotnikov, R. Lapovok, C. F. Gu, C. H. J. Davies, and Y. Estrin, “Size effects in micro cup drawing,” Materials Science and Engineering: A, vol. 550, pp. 312–319, Jul. 2012, doi: 10.1016/j.msea.2012.04.079.
  45. [45] M. W. Fu, B. Yang, and W. L. Chan, “Experimental and simulation studies of micro blanking and deep drawing compound process using copper sheet,” Journal of Materials Processing Technology, vol. 213, no. 1, pp. 101–110, Jan. 2013, doi: 10.1016/j.jmatprotec.2012.08.007.
  46. [46] C.-H. Chen, J.-T. Gau, and R.-S. Lee, “An Experimental and Analytical Study on the Limit Drawing Ratio of Stainless Steel 304 Foils for Microsheet Forming,” Materials and Manufacturing Processes, vol. 24, no. 12, pp. 1256–1265, Dec. 2009, doi: 10.1080/10426910903129786.
  47. [47] X. Ma, J. Zhao, W. Du, X. Zhang, L. Jiang, and Z. Jiang, “Study on micro hydro-mechanical deep drawing using finite element method,” MATEC Web of Conferences, vol. 80, p. 02009, Oct. 2016, doi: 10.1051/matecconf/20168002009.
  48. [48] Y. M. Huang, Y. S. Wu, and J. Y. Huang, “The influence of ultrasonic vibration-assisted micro-deep drawing process,” The International Journal of Advanced Manufacturing Technology, vol. 71, no. 5–8, pp. 1455–1461, Mar. 2014, doi: 10.1007/s00170-013-5553-1.
  49. [49] H. Sato, K. Manabe, K. Ito, D. Wei, and Z. Jiang, “Development of servo-type micro-hydromechanical deep-drawing apparatus and micro deep-drawing experiments of circular cups,” Journal of Materials Processing Technology, vol. 224, pp. 233–239, Oct. 2015, doi: 10.1016/j.jmatprotec.2015.05.014.
  50. [50] H. Sato, K. Manabe, D. Wei, Z. Jiang, and S. Alexandrov, “Tribological behavior in micro–sheet hydroforming,” Tribology International, vol. 97, pp. 302–312, May 2016, doi: 10.1016/j.triboint.2016.01.041.
  51. [51] L. Luo et al., “Effects of hydraulic pressure on wrinkling and earing in micro hydro deep drawing of SUS304 circular cups,” The International Journal of Advanced Manufacturing Technology, vol. 90, no. 1–4, pp. 189–197, Apr. 2017, doi: 10.1007/s00170-016-9380-z.
  52. [52] L. Luo, Z. Jiang, D. Wei, X. Wang, C. Zhou, and Q. Huang, “Micro-hydromechanical deep drawing of metal cups with hydraulic pressure effects,” Frontiers of Mechanical Engineering, vol. 13, no. 1, pp. 66–73, Mar. 2018, doi: 10.1007/s11465-018-0468-z.
  53. [53] L. Luo et al., “An experimental and numerical study of micro deep drawing of SUS304 circular cups,” Manufacturing Review, vol. 2, p. 27, Nov. 2015, doi: 10.1051/mfreview/2015029.
  54. [54] L. Luo et al., “Effects of surface roughness on micro deep drawing of circular cups with consideration of size effects,” Finite Elements in Analysis and Design, vol. 111, pp. 46–55, Apr. 2016, doi: 10.1016/j.finel.2015.11.005.
  55. [55] L. Luo, Z. Jiang, and D. Wei, “Influences of micro-friction on surface finish in micro deep drawing of SUS304 cups,” Wear, vol. 374–375, pp. 36–45, Mar. 2017, doi: 10.1016/j.wear.2016.11.043.
  56. [56] C. C. Chang and H. S. Chen, “Effect of Grain Size on Micro Deep Drawing of SUS304 Stainless Steel Square Cup,” Key Engineering Materials, vol. 661, pp. 77–82, Sep. 2015, doi: 10.4028/www.scientific.net/KEM.661.77.
  57. [57] R. Lee, C. Chen, and J.-T. Gau, “Effect of Thickness to Grain Size Ratio on Drawability for Micro Deep Drawing of AISI 304 Stainless Steel,” Jan. 2009.
  58. [58] J.-T. Gau, S. Teegala, K.-M. Huang, T.-J. Hsiao, and B.-T. Lin, “Using micro deep drawing with ironing stages to form stainless steel 304 micro cups,” Journal of Manufacturing Processes, vol. 15, no. 2, pp. 298–305, Apr. 2013, doi: 10.1016/j.jmapro.2013.01.009.
  59. [59] J. Zhao et al., “Experimental Investigation on Micro Deep Drawing of Stainless Steel Foils with Different Microstructural Characteristics,” Chinese Journal of Mechanical Engineering, vol. 34, no. 1, p. 40, Dec. 2021, doi: 10.1186/s10033-021-00556-5.
  60. [60] N. Guo, J. Wang, C. Y. Sun, Y. F. Zhang, and M. W. Fu, “Analysis of size dependent earing evolution in micro deep drawing of TWIP steel by using crystal plasticity modeling,” International Journal of Mechanical Sciences, vol. 165, p. 105200, Jan. 2020, doi: 10.1016/j.ijmecsci.2019.105200.
  61. [61] C.-C. Kuo, B.-T. Lin, and W.-T. Wang, “Optimization of microridge punch design for deep drawing process by using the fuzzy Taguchi method,” The International Journal of Advanced Manufacturing Technology, vol. 103, no. 1–4, pp. 177–186, Jul. 2019, doi: 10.1007/s00170-019-03515-6.
  62. [62] M. Geiger, M. Kleiner, R. Eckstein, N. Tiesler, and U. Engel, “Microforming,” CIRP Annals, vol. 50, no. 2, pp. 445–462, 2001, doi: 10.1016/S0007-8506(07)62991-6.
  63. [63] L. Luo, Z. Jiang, D. Wei, and F. Jia, “A study of influence of hydraulic pressure on micro-hydromechanical deep drawing considering size effects and surface roughness,” Wear, vol. 477, p. 203803, Jul. 2021, doi: 10.1016/j.wear.2021.203803.
  64. [64] F. Vollertsen, “Size Effects in Micro Forming,” Key Engineering Materials, vol. 473, pp. 3–12, Mar. 2011, doi: 10.4028/www.scientific.net/KEM.473.3.
  65. [65] I. Aminzahed, M. M. Mashhadi, and M. R. V. Sereshk, “Influence of drawn radius in micro deep drawing process of rectangular work pieces via size dependent analysis using piezoelectric actuator,” International Journal on Interactive Design and Manufacturing (IJIDeM), vol. 11, no. 4, pp. 893–902, Nov. 2017, doi: 10.1007/s12008-015-0283-2.
  66. [66] F. Vollertsen, “Categories of size effects,” Production Engineering, vol. 2, no. 4, pp. 377–383, Dec. 2008, doi: 10.1007/s11740-008-0127-z.
  67. [67] H. Justinger and G. Hirt, “Analysis of Size-Effects in the Miniaturized Deep Drawing Process,” Key Engineering Materials, vol. 344, pp. 791–798, Jul. 2007, doi: 10.4028/www.scientific.net/KEM.344.791.
  68. [68] Y. Li, G. Wang, S. Liu, J. Yang, C. Yang, and K. Zhang, “Drawability and size effects for micro-arrayed deep drawing of Ni-Co/GO nanocomposite foils,” Journal of Materials Processing Technology, vol. 249, pp. 221–228, Nov. 2017, doi: 10.1016/j.jmatprotec.2017.06.002.
  69. [69] I. Aminzahed, M. M. Mashhadi, and M. R. V. Sereshk, “Investigation of holder pressure and size effects in micro deep drawing of rectangular work pieces driven by piezoelectric actuator,” Materials Science and Engineering: C, vol. 71, pp. 685–689, Feb. 2017, doi: 10.1016/j.msec.2016.10.068.
  70. [70] N. Guo, C. Y. Sun, and M. W. Fu, “Size effect affected deformation characteristics in micro deep drawing of TWIP domed-bottom cups,” Procedia Engineering, vol. 207, pp. 2072–2077, 2017, doi: 10.1016/j.proeng.2017.10.1066.
  71. [71] Z. Hu, “Realisation and application of size dependent FEM-simulation for deep drawing of rectangular work pieces,” CIRP Journal of Manufacturing Science and Technology, vol. 4, no. 1, pp. 90–95, Jan. 2011, doi: 10.1016/j.cirpj.2011.05.006.
  72. [72] F.-K. Chen and S.-Y. Lin, “A formability index for the deep drawing of stainless steel rectangular cups,” The International Journal of Advanced Manufacturing Technology, vol. 34, no. 9–10, pp. 878–888, Sep. 2007, doi: 10.1007/s00170-006-0659-3.
  73. [73] Y.-M. Huang, Y.-W. Tsai, and C.-L. Li, “Analysis of forming limits in metal forming processes,” Journal of Materials Processing Technology, vol. 201, no. 1–3, pp. 385–389, May 2008, doi: 10.1016/j.jmatprotec.2007.11.279.
  74. [74] F.-K. Chen, T.-B. Huang, and C.-K. Chang, “Deep drawing of square cups with magnesium alloy AZ31 sheets,” International Journal of Machine Tools and Manufacture, vol. 43, no. 15, pp. 1553–1559, Dec. 2003, doi: 10.1016/S0890-6955(03)00198-6.
  75. [75] C. Wang, B. Guo, and D. Shan, “Effect of die cavity dimension on micro U deep drawing behaviour with T2 foil,” Transactions of Nonferrous Metals Society of China, vol. 19, pp. s790–s794, Dec. 2009, doi: 10.1016/S1003-6326(10)60153-7.
  76. [76] G. Behrens, M. Ruhe, H. Tetzel, and F. Vollertsen, “Effect of tool geometry variations on the punch force in micro deep drawing of rectangular components,” Production Engineering, vol. 9, no. 2, pp. 195–201, Apr. 2015, doi: 10.1007/s11740-015-0604-0.
  77. [77] F. H. Yeh, C. L. Li, and K. N. Tsay, “An Analysis of Forming Limit for Various Arc Radii of Punch in Micro Deep Drawing of the Square Cup,” Advanced Materials Research, vol. 433–440, pp. 660–665, Jan. 2012, doi: 10.4028/www.scientific.net/AMR.433-440.660.
  78. [78] L. Luo, D. Wei, G. Zu, and Z. Jiang, “Influence of blank holder-die gap on micro-deep drawing of SUS304 cups,” International Journal of Mechanical Sciences, vol. 191, p. 106065, Feb. 2021, doi: 10.1016/j.ijmecsci.2020.106065.
  79. [79] W. T. Li, M. W. Fu, J. L. Wang, and B. Meng, “Grain size effect on multi-stage micro deep drawing of micro cup with domed bottom,” International Journal of Precision Engineering and Manufacturing, vol. 17, no. 6, pp. 765–773, Jun. 2016, doi: 10.1007/s12541-016-0094-9.
  80. [80] L. Luo, Z. Jiang, D. Wei, K. Manabe, and H. Sato, “Experimental and numerical study of micro deep drawing,” MATEC Web of Conferences, vol. 21, p. 09003, Aug. 2015, doi: 10.1051/matecconf/20152109003.
  81. [81] H.-S. Su, F.-K. Chen, and K.-Y. Tu, “Micro-Drawing of Circular Cups with Thin Stainless Steel Sheets,” in The 14th International Esaform Conference On Material Forming: Esaform 2011, 2011, pp. 270–275, doi: 10.1063/1.3589527.
  82. [82] F. Vollertsen, D. Biermann, H. N. Hansen, I. S. Jawahir, and K. Kuzman, “Size effects in manufacturing of metallic components,” CIRP Annals, vol. 58, no. 2, pp. 566–587, 2009, doi: 10.1016/j.cirp.2009.09.002.
  83. [83] I. K. Irthiea and G. Green, “Evaluation of micro deep drawing technique using soft die-simulation and experiments,” The International Journal of Advanced Manufacturing Technology, vol. 89, no. 5–8, pp. 2363–2374, Mar. 2017, doi: 10.1007/s00170-016-9167-2.
  84. [84] I. Irthiea, “Experimental and numerical evaluation of micro flexible deep drawing technique using floating ring,” Journal of Manufacturing Processes, vol. 38, pp. 556–563, Feb. 2019, doi: 10.1016/j.jmapro.2019.01.050.
  85. [85] I. Irthiea, G. Green, S. Hashim, and A. Kriama, “Experimental and numerical investigation on micro deep drawing process of stainless steel 304 foil using flexible tools,” International Journal of Machine Tools and Manufacture, vol. 76, pp. 21–33, Jan. 2014, doi: 10.1016/j.ijmachtools.2013.09.006.
  86. [86] Z. H. Mahmood, I. K. Irthiea, and A. K. Ahmed, “Optimization of initial blank shape for flexible micro deep drawing of square parts,” Materials Today: Proceedings, vol. 20, pp. 555–559, 2020, doi: 10.1016/j.matpr.2019.09.188.
  87. [87] G. Behrens and F. Vollertsen, “Influence of Tool Geometry Variation on the Punch Force in Micro Deep Drawing,” Key Engineering Materials, vol. 554–557, pp. 1306–1311, Jun. 2013, doi: 10.4028/www.scientific.net/KEM.554-557.1306.
  88. [88] G. H. Lu, Z. Y. Xu, R. M. Wang, and Y. Wang, “Experimental Study of Micro Deep Drawing for H62 Brass,” Key Engineering Materials, vol. 464, pp. 548–551, Jan. 2011, doi: 10.4028/www.scientific.net/KEM.464.548.
  89. [89] T. Atul S and M. C. L. Babu, “A review on effect of thinning, wrinkling and spring-back on deep drawing process,” Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, vol. 233, no. 4, pp. 1011–1036, Mar. 2019, doi: 10.1177/0954405417752509.
  90. [90] T. Shimizu, M. Ogawa, M. Yang, and K. Manabe, “Plastic anisotropy of ultra-thin rolled phosphor bronze foils and its thickness strain evolution in micro-deep drawing,” Materials & Design (1980-2015), vol. 56, pp. 604–612, Apr. 2014, doi: 10.1016/j.matdes.2013.11.048.
  91. [91] F. Gong, B. Guo, C. Wang, and D. Shan, “Micro deep drawing of micro cups by using DLC film coated blank holders and dies,” Diamond and Related Materials, vol. 20, no. 2, pp. 196–200, Feb. 2011, doi: 10.1016/j.diamond.2010.11.025.
  92. [92] C. Wang, B. Guo, D. Shan, and X. Bai, “Experimental research on micro-deep drawing processes of pure gold thin sheet using DLC-coated female die,” The International Journal of Advanced Manufacturing Technology, vol. 67, no. 9–12, pp. 2477–2487, Aug. 2013, doi: 10.1007/s00170-012-4665-3.
  93. [93] C. Wang, C. Wang, B. Guo, and D. Shan, “Effects of tribological behavior of DLC film on micro-deep drawing processes,” Transactions of Nonferrous Metals Society of China, vol. 24, no. 9, pp. 2877–2882, Sep. 2014, doi: 10.1016/S1003-6326(14)63421-X.
  94. [94] Z. Hu, A. Schubnov, and F. Vollertsen, “Tribological behaviour of DLC-films and their application in micro deep drawing,” Journal of Materials Processing Technology, vol. 212, no. 3, pp. 647–652, Mar. 2012, doi: 10.1016/j.jmatprotec.2011.10.012.
  95. [95] H. Kamali et al., “Effects of nano-particle lubrication on micro deep drawing of Mg-Li alloy,” The International Journal of Advanced Manufacturing Technology, vol. 104, no. 9–12, pp. 4409–4419, Oct. 2019, doi: 10.1007/s00170-019-04267-z.
  96. [96] H. Kamali, H. Xie, H. Zhao, F. Jia, H. Wu, and Z. Jiang, “Frictional Size Effect of Light-Weight Mg–Li Alloy in Micro Deep Drawing under Nano-Particle Lubrication Condition,” Materials Transactions, vol. 61, no. 2, pp. 239–243, Feb. 2020, doi: 10.2320/matertrans.MT-ML2019002.
  97. [97] F. Gong, B. Guo, C. J. Wang, and D. Bin Shan, “Effects of lubrication conditions on micro deep drawing,” Microsystem Technologies, vol. 16, no. 10, pp. 1741–1747, Oct. 2010, doi: 10.1007/s00542-010-1108-7.
  98. [98] A. Mousavi, M. Schomäcker, and A. Brosius, “Macro and Micro Structuring of Deep Drawing’s Tools for Lubricant Free Forming,” Procedia Engineering, vol. 81, pp. 1890–1895, 2014, doi: 10.1016/j.proeng.2014.10.252.
  99. [99] H. Flosky and F. Vollertsen, “Wear Behavior of a DLC-Coated Blanking and Deep Drawing Tool Combination,” Key Engineering Materials, vol. 549, pp. 511–517, Apr. 2013, doi: 10.4028/www.scientific.net/KEM.549.511.
Article Metrics
54
Views
48
Downloads

SCITE

DIMENSIONS

Publication Information
Published December 30, 2024
Section Articles
Copyright Copyright (c) 2024 C. Jai Shiva Rao, K. Prasanna Lakshmi, M. Venkata Ramana, Jalumedi Babu
Keywords
  • Deep drawing
  • Magnetorheological fluids
  • Hydro mechanical deep drawing
  • Micro deep drawing
  • Size effects