Article Sidebar

Download
PDF
Statistic
Read Counter : 452 Download : 116

Downloads

Download data is not yet available.

Main Article Content

Abstract

This study aimed to comprehensively analyze particulate matter (PM) emissions from vehicles, focusing on their sources based on combustion and non-combustion process, classification (PM10, PM2.5, PM0.1), and health implications (including PM transportation into lungs). Employing bibliometric analysis, we assessed the growth of scientific publications related to PM, identifying top-cited works based on citations, publisher, author, country, and affiliation. We also visually mapped the development of research in this field using keyword-based publication data from Scopus (2019-2023) with the keywords "particulate matter", "emission”, and "particle size" by utilizing Publish or Perish and VOSviewer software. Our findings underscore a significant uptrend in particulate matter research, shedding light on key areas of investigation. This study serves as a valuable resource for academics seeking research direction and a reference point for future investigations.

Keywords

Abrasive Bibliometric Combustion Particulate Matter Particle Size Tire Vehicle VOSviewer

Article Details

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

References

  1. P. Geng, H. Zhang, and S. Yang, “Experimental investigation on the combustion and particulate matter (PM) emissions from a port-fuel injection (PFI) gasoline engine fueled with methanol–ultralow sulfur gasoline blends,” Fuel, vol. 145, pp. 221–227, 2015, doi: 10.1016/j.fuel.2014.12.067.
  2. J. R. Marlon et al., “How hope and doubt affect climate change mobilization,” Frontiers in Communication, vol. 4, p. 20, 2019, doi: 10.3389/fcomm.2019.00020.
  3. N. K. Gali, F. Yang, C. S. Cheung, and Z. Ning, “A comparative analysis of chemical components and cell toxicity properties of solid and semi-volatile PM from diesel and biodiesel blend,” Journal of Aerosol Science, vol. 111, pp. 51–64, 2017, doi: 10.1016/j.jaerosci.2017.06.005.
  4. S. Dey and N. S. Mehta, “Automobile pollution control using catalysis,” Resources, Environment and Sustainability, vol. 2, p. 100006, 2020, doi: 10.1016/j.resenv.2020.100006.
  5. O. I. Awad, X. Ma, M. Kamil, O. M. Ali, Z. Zhang, and S. Shuai, “Particulate emissions from gasoline direct injection engines: A review of how current emission regulations are being met by automobile manufacturers,” Science of the Total Environment, vol. 718, p. 137302, 2020, doi: 10.1016/j.scitotenv.2020.137302.
  6. A. Zare et al., “Hazardous particles during diesel engine cold-start and warm-up: Characterisation of particulate mass and number under the impact of biofuel and lubricating oil,” Journal of Hazardous Materials, vol. 460, p. 132516, 2023, doi: 10.1016/j.jhazmat.2023.132516.
  7. M. Vijay Kumar et al., “Impact of a Thermal Barrier Coating in Low Heat Rejection Environment Area of a Diesel Engine,” Sustainability, vol. 14, no. 23, p. 15801, 2022, doi: 10.3390/su142315801.
  8. T. T. Huyen et al., “Characteristics of chemical components in fine particles (PM2. 5) and ultrafine particles (PM0. 1) in Hanoi, Vietnam: a case study in two seasons with different humidity,” Water, Air, & Soil Pollution, vol. 232, no. 5, p. 183, 2021, doi: 10.1007/s11270-021-05108-0.
  9. M. U. Ali, G. Liu, B. Yousaf, H. Ullah, Q. Abbas, and M. A. M. Munir, “A systematic review on global pollution status of particulate matter-associated potential toxic elements and health perspectives in urban environment,” Environmental geochemistry and health, vol. 41, pp. 1131–1162, 2019, doi: 10.1007/s10653-018-0203-z.
  10. N. Manojkumar, B. Srimuruganandam, and S. M. S. Nagendra, “Application of multiple-path particle dosimetry model for quantifying age specified deposition of particulate matter in human airway,” Ecotoxicology and Environmental Safety, vol. 168, pp. 241–248, 2019, doi: 10.1016/j.ecoenv.2018.10.091.
  11. A. B. D. Nandiyanto, D. F. Al Husaeni, and R. Ragadhita, “Bibliometric data analysis of research on resin-based brake-pads from 2012 to 2021 using vosviewer mapping analysis computations,” ASEAN Journal for Science and Engineering in Materials, vol. 2, no. 1, pp. 35–44, 2023, [Online]. Available: https://ejournal.bumipublikasinusantara.id/index.php/ajsem/article/view/112.
  12. A. B. D. Nandiyanto, D. F. Al Husaeni, and D. N. Al Husaeni, “Social Impact and Internationalization of ‘Indonesian Journal of Science and Technology’ the Best Journal in Indonesia: A Bibliometric Analysis,” Journal of Advanced Research in Applied Sciences and Engineering Technology, vol. 32, no. 2, pp. 42–59, 2023, doi: 10.37934/araset.32.2.4259.
  13. D. F. Al Husaeni and A. B. D. Nandiyanto, “Bibliometric using Vosviewer with Publish or Perish (using google scholar data): From step-by-step processing for users to the practical examples in the analysis of digital learning articles in pre and post Covid-19 pandemic,” ASEAN Journal of Science and Engineering, vol. 2, no. 1, pp. 19–46, 2022, doi: 10.17509/ajse.v2i1.37368.
  14. M. J. Cobo, A. G. López‐Herrera, E. Herrera‐Viedma, and F. Herrera, “Science mapping software tools: Review, analysis, and cooperative study among tools,” Journal of the American Society for information Science and Technology, vol. 62, no. 7, pp. 1382–1402, 2011, doi: 10.1002/asi.21525.
  15. N. Donthu, S. Kumar, D. Mukherjee, N. Pandey, and W. M. Lim, “How to conduct a bibliometric analysis: An overview and guidelines,” Journal of Business Research, vol. 133, p. 2850296, 2021, doi: 10.1016/j.jbusres.2021.04.070.
  16. M. Mishra et al., “An overview of research on natural resources and indigenous communities: a bibliometric analysis based on Scopus database (1979–2020),” Environmental Monitoring and Assessment, vol. 193, pp. 1–17, 2021, doi: 10.1007/s10661-020-08793-2.
  17. M. A. Koseoglu, “Growth and structure of authorship and co-authorship network in the strategic management realm: Evidence from the Strategic Management Journal,” BRQ Business Research Quarterly, vol. 19, no. 3, pp. 153–170, 2016, doi: 10.1016/j.brq.2016.02.001.
  18. S. Laengle et al., “Forty years of the European Journal of Operational Research: A bibliometric overview,” European Journal of Operational Research, vol. 262, no. 3, pp. 803–816, 2017, doi: 10.1016/j.ejor.2017.04.027.
  19. J. M. Merigó, W. Pedrycz, R. Weber, and C. de la Sotta, “Fifty years of Information Sciences: A bibliometric overview,” Information Sciences, vol. 432, pp. 245–268, 2018, doi: 10.1016/j.ins.2017.11.054.
  20. L. Waltman, N. J. Van Eck, and E. C. M. Noyons, “A unified approach to mapping and clustering of bibliometric networks,” Journal of informetrics, vol. 4, no. 4, pp. 629–635, 2010, doi: 10.1016/j.joi.2010.07.002.
  21. D. F. Ramadhan, A. M. Fabian, and H. M. Saputra, “Dental suction aerosol: Bibliometric analysis,” ASEAN Journal of Science and Engineering, vol. 2, no. 3, pp. 295–302, 2022, [Online]. Available: https://ejournal.upi.edu/index.php/AJSE/article/view/50658/20174.
  22. I. Hamidah, S. Sriyono, and M. N. Hudha, “A Bibliometric analysis of Covid-19 research using VOSviewer,” Indonesian Journal of Science and Technology, vol. 5, no. 2, pp. 34–41, 2020, doi: 10.17509/ijost.v5i2.24522.
  23. M. Setiyo, D. Yuvenda, and O. D. Samuel, “The concise latest report on the advantages and disadvantages of pure biodiesel (B100) on engine performance: literature review and bibliometric analysis,” Indonesian Journal of Science and Technology, vol. 6, no. 3, pp. 469–490, 2021, doi: 10.17509/ijost.v6i3.38430.
  24. H. Soegoto, E. S. Soegoto, S. Luckyardi, and A. A. Rafdhi, “A Bibliometric Analysis of Management Bioenergy Research Using Vosviewer Application,” Indonesian Journal of Science and Technology, vol. 7, no. 1, pp. 89–104, 2022, doi: 10.17509/ijost.v7i1.43328.
  25. A. Mudzakir, K. M. Rizky, H. S. H. Munawaroh, and D. Puspitasari, “Oil palm empty fruit bunch waste pretreatment with benzotriazolium-based ionic liquids for cellulose conversion to glucose: Experiments with computational bibliometric analysis,” Indonesian Journal of Science and Technology, vol. 7, no. 2, pp. 291–310, 2022, doi: 10.17509/ijost.v7i2.50800.
  26. I. Hamidah et al., “Biomass-based supercapacitors electrodes for electrical energy storage systems activated using chemical activation method: A Review,” Indonesian Journal of Science and Technology, vol. 8, no. 3, pp. 439–468, 2023, doi: 10.17509/ijost.v8i3.60688.
  27. A. Ruzmetov and A. Ibragimov, “Past, current and future trends of salicylic acid and its derivatives: A bibliometric review of papers from the Scopus database published from 2000 to 2021,” ASEAN Journal for Science and Engineering in Materials, vol. 2, no. 1, pp. 53–68, 2023, [Online]. Available: https://ejournal.bumipublikasinusantara.id/index.php/ajsem/article/view/225.
  28. N. A. H. M. Nordin, “Correlation between process engineering and special needs from bibliometric analysis perspectives,” ASEAN Journal of Community and Special Needs Education, vol. 1, no. 1, pp. 9–16, 2022, [Online]. Available: https://ejournal.bumipublikasinusantara.id/index.php/ajcsne/article/view/3.
  29. M. R. Bilad, “Bibliometric analysis for understanding the correlation between chemistry and special needs education using vosviewer indexed by google,” ASEAN Journal of Community and Special Needs Education, vol. 1, no. 2, pp. 61–68, 2022, [Online]. Available: https://ejournal.bumipublikasinusantara.id/index.php/ajcsne/article/view/61.
  30. I. R. Firdaus, M. F. Febrianty, P. N. Awwaludin, M. N. F. Ilsya, Y. Nurcahya, and K. Sultoni, “Nutritional research mapping for endurance sports: A bibliometric analysis,” ASEAN Journal of Physical Education and Sport Science, vol. 2, no. 1, pp. 23–38, 2023, [Online]. Available: https://ejournal.bumipublikasinusantara.id/index.php/ajopess/article/view/198.
  31. I. B. Mulyawati and D. F. Ramadhan, “Bibliometric and visualized analysis of scientific publications on geotechnics fields,” ASEAN Journal of Science and Engineering Education, vol. 1, no. 1, pp. 37–46, 2021, doi: 10.17509/ajsee.v1i1.32405.
  32. N. A. H. M. Nordin, “A bibliometric analysis of computational mapping on publishing teaching science engineering using VOSviewer application and correlation,” Indonesian Journal of Teaching in Science, vol. 2, no. 2, pp. 127–138, 2022, doi: 10.17509/ijotis.v2i2.47038.
  33. M. D. H. Wirzal and Z. A. Putra, “What is the correlation between chemical engineering and special needs education from the perspective of bibliometric analysis using vosviewer indexed by google scholar,” Indonesian Journal of Community and Special Needs Education, vol. 2, no. 2, pp. 103–110, 2022, doi: 10.17509/ijcsne.v2i2.44581.
  34. M. Solehuddin, M. Muktiarni, N. I. Rahayu, and R. Maryanti, “Counseling guidance in science education: Definition, literature review, and bibliometric analysis,” Journal of Engineering Science and Technology, vol. 18, pp. 1–13, 2023.
  35. I. Sahidin et al., “Phytochemical profile and biological activities of ethylacetate extract of peanut (Arachis hypogaea L.) stems: In-vitro and in-silico studies with bibliometric analysis,” Indonesian Journal of Science and Technology, vol. 8, no. 2, pp. 217–242, 2023, doi: 10.17509/ijost.v8i2.54822.
  36. A. B. D. Nandiyanto and D. F. Al Husaeni, “A bibliometric analysis of materials research in Indonesian journal using VOSviewer,” Journal of Engineering Research, vol. ASSEEE, no. Special Issue, pp. 1–16, 2021, doi: 10.36909/jer.ASSEEE.16037.
  37. D. F. Al Husaeni and A. B. D. Nandiyanto, “Bibliometric computational mapping analysis of publications on mechanical engineering education using vosviewer,” Journal of Engineering Science and Technology, vol. 17, no. 2, pp. 1135–1149, 2022.
  38. A. B. D. Nandiyanto, R. Ragadhita, D. N. Al Husaeni, and W. C. Nugraha, “Research trend on the use of mercury in gold mining: Literature review and bibliometric analysis,” Moroccan Journal of Chemistry, vol. 11, no. 1, p. 11, 2023, doi: 10.48317/IMIST.PRSM/morjchem-v11i1.36576.
  39. E. R. Nugraha and A. B. D. Nandiyanto, “Bibliometric Analysis of Titanium Dioxide Nanoparticle Synthesis Research for Photocatalyst Using Vosviewer,” Open Soil Science and Environment, vol. 1, no. 1, pp. 8–14, 2022, doi: 10.33292/osse.v1i1.2.
  40. A. B. D. Nandiyanto, R. Ragadhita, M. Fiandini, D. N. Al Husaeni, and M. Aziz, “The Role of Iron Oxide in Hydrogen Production: Theory and Bibliometric Analyses,” Moroccan Journal of Chemistry, vol. 11, no. 04, pp. 11–14, 2023, doi: 10.48317/IMIST.PRSM/morjchem-v11i04.41591.
  41. A. Aldhafi and A. B. D. Nandiyanto, “A Bibliometric Analysis of Carbon Nanotubes Synthesis Research Using Vosviewer,” International Journal of Research and Applied Technology (INJURATECH), vol. 1, no. 2, pp. 76–81, 2021, doi: 10.34010/injuratech.v1i2.6404.
  42. S. Deni and A. B. D. Nandiyanto, “Bibliometric analysis of nano-sized agricultural waste brake pads research during 2018-2022 using Vosviewer,” International Journal of Sustainable Transportation Technology, vol. 5, no. 1, pp. 12–17, 2022, doi: 10.31427/IJSTT.2022.5.1.2.
  43. T. M. S. Erlangga and A. B. D. Nandiyanto, “Research Developments Analysis on Gold Nanoparticles (AuNPS) as Antimicrobial Agents through Bibliometric Computational Mapping using VOSviewer,” Fullerene Journal of Chemistry, vol. 7, no. 2, pp. 101–110, 2023, doi: 10.37033/fjc.v7i2.462.
  44. Z. Rufaida and A. B. D. Nandiyanto, “Bibliometric Analysis of Aluminium Oxide Nanoparticle in Biomedical Applications,” Advance Sustainable Science Engineering and Technology, vol. 4, no. 2, p. 220203, 2022, doi: 10.26877/asset.v4i2.13336.
  45. K. R. Daellenbach et al., “Sources of particulate-matter air pollution and its oxidative potential in Europe,” Nature, vol. 587, no. 7834, pp. 414–419, 2020, doi: 10.1038/s41586-020-2902-8.
  46. C. Peng et al., “Production of char from sewage sludge employing hydrothermal carbonization: char properties, combustion behavior and thermal characteristics,” Fuel, vol. 176, pp. 110–118, 2016, doi: 10.1016/j.fuel.2016.02.068.
  47. B. Alahmad, H. Khraishah, K. Althalji, W. Borchert, F. Al-Mulla, and P. Koutrakis, “Connections between air pollution, climate change, and cardiovascular health,” Canadian Journal of Cardiology, vol. 39, no. 9, pp. 1182–1190, 2023, doi: 10.1016/j.cjca.2023.03.025.
  48. K. Rajagopal, S. Ramachandran, and R. K. Mishra, “Roadside measurements of nanoparticles and their dynamics in relation to traffic sources in Delhi: Impact of restrictions and pollution events,” Urban Climate, vol. 51, p. 101625, 2023, doi: 10.1016/j.uclim.2023.101625.
  49. J. Lewtas, “Air pollution combustion emissions: characterization of causative agents and mechanisms associated with cancer, reproductive, and cardiovascular effects,” Mutation Research/Reviews in Mutation Research, vol. 636, no. 1–3, pp. 95–133, 2007, doi: 10.1016/j.mrrev.2007.08.003.
  50. A. Charron, R. M. Harrison, and P. Quincey, “What are the sources and conditions responsible for exceedences of the 24 h PM10 limit value (50 μg m− 3) at a heavily trafficked London site?,” Atmospheric Environment, vol. 41, no. 9, pp. 1960–1975, 2007, doi: 10.1016/j.atmosenv.2006.10.041.
  51. A. Thorpe and R. M. Harrison, “Sources and properties of non-exhaust particulate matter from road traffic: a review,” Science of the total environment, vol. 400, no. 1–3, pp. 270–282, 2008, doi: 10.1016/j.scitotenv.2008.06.007.
  52. A. B. D. Nandiyanto et al., “The effects of rice husk particles size as a reinforcement component on resin-based brake pad performance: From literature review on the use of agricultural waste as a reinforcement material, chemical polymerization reaction of epoxy resin, to experiments,” Automotive Experiences, vol. 4, no. 2, pp. 68–82, 2021, doi: 10.31603/ae.5217.
  53. A. B. D. Nandiyanto, R. Ragadhita, M. Fiandini, D. F. Al Husaeni, D. N. Al Husaeni, and F. Fadhillah, “Domestic waste (eggshells and banana peels particles) as sustainable and renewable resources for improving resin-based brakepad performance: Bibliometric literature review, techno-economic analysis, dual-sized reinforcing experiments, to comparison...,” Communications in Science and Technology, vol. 7, no. 1, pp. 50–61, 2022, doi: 10.21924/cst.7.1.2022.757.
  54. O. R. Adetunji, A. M. Adedayo, S. O. Ismailia, O. U. Dairo, I. K. Okediran, and O. M. Adesusi, “Effect of silica on the mechanical properties of palm kernel shell based automotive brake pad,” Mechanical Engineering for Society and Industry, vol. 2, no. 1, pp. 7–16, 2022, doi: 10.31603/mesi.6178.
  55. G. Akıncıoğlu, S. Akıncıoğlu, H. Öktem, and İ. Uygur, “Wear response of non-asbestos brake pad composites reinforced with walnut shell dust,” Journal of the Australian Ceramic Society, vol. 56, pp. 1061–1072, 2020, doi: 10.1007/s41779-020-00452-6.
  56. S. Choosri, N. Sombatsompop, E. Wimolmala, and S. Thongsang, “Potential use of fly ash and bagasse ash as secondary abrasives in phenolic composites for eco-friendly brake pads applications,” Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, vol. 233, no. 5, pp. 1296–1305, 2019, doi: 10.1177/0954407018772240.
  57. C. H. Achebe, E. N. Obika, J. L. Chukwuneke, and O. E. Ani, “Optimisation of hybridised cane wood–palm fruit fibre frictional material,” Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, vol. 233, no. 12, pp. 2490–2497, 2019, doi: 10.1177/1464420719863445.
  58. N. H. A. Norhasnan et al., “Physicomechanical properties of rice husk/coco peat reinforced acrylonitrile butadiene styrene blend composites,” Polymers, vol. 13, no. 7, p. 1171, 2021, doi: 10.3390/polym13071171.
  59. I. O. Adeyemi, A. A. Nuhu, and E. B. Thankgod, “Development of asbestos-free automotive brake pad using ternary agro-waste fillers,” Development, vol. 3, no. 7, pp. 5307–5323, 2016.
  60. O. A. Ajibade, J. O. Agunsoye, and S. A. Oke, “A wear rate model incorporating inflationary cost of agro-waste filled composites for brake pad applications to lower composite cost,” SN Applied Sciences, vol. 3, pp. 1–21, 2021, doi: 10.1007/s42452-020-04016-y.
  61. A. I. Olabisi, A. N. Adam, and O. M. Okechukwu, “Development and assessment of composite brake pad using pulverized cocoa beans shells filler,” International Journal of Materials Science and Applications, vol. 5, no. 2, pp. 66–78, 2016, doi: 10.11648/j.ijmsa.20160502.16.
  62. D. Chan and G. W. Stachowiak, “Review of automotive brake friction materials,” Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, vol. 218, no. 9, pp. 953–966, 2004, doi: 10.1243/0954407041856773.
  63. B. D. Garg, S. H. Cadle, P. A. Mulawa, P. J. Groblicki, C. Laroo, and G. A. Parr, “Brake wear particulate matter emissions,” Environmental Science & Technology, vol. 34, no. 21, pp. 4463–4469, 2000, doi: 10.1021/es001108h.
  64. P. G. Sanders, N. Xu, T. M. Dalka, and M. M. Maricq, “Airborne brake wear debris: size distributions, composition, and a comparison of dynamometer and vehicle tests,” Environmental science & technology, vol. 37, no. 18, pp. 4060–4069, 2003, doi: 10.1021/es034145s.
  65. N. N. Azizah, R. Maryanti, and A. B. D. Nandiyanto, “How to search and manage references with a specific referencing style using google scholar: From step-by-step processing for users to the practical examples in the referencing education,” Indonesian Journal of Multidiciplinary Research, vol. 1, no. 2, pp. 267–294, 2021, doi: 10.17509/ijomr.v1i2.37694.
  66. A. B. D. Nandiyanto, M. K. Biddinika, and F. Triawan, “Evaluation on research effectiveness in a subject area among top class universities: a case of Indonesia’s academic publication dataset on chemical and material sciences,” Journal of Engineering Science and Technology, vol. 15, no. 3, pp. 1747–1775, 2020.
  67. A. B. D. Nandiyanto, M. K. Biddinika, and F. Triawan, “How bibliographic dataset portrays decreasing number of scientific publication from Indonesia,” Indonesian Journal of Science and Technology, vol. 5, no. 1, pp. 154–175, 2020, doi: 10.17509/ijost.v5i1.22265.
  68. J. Kelly, T. Sadeghieh, and K. Adeli, “Peer review in scientific publications: benefits, critiques, & a survival guide,” Ejifcc, vol. 25, no. 3, p. 227, 2014.
  69. X. Cao, Y. Chen, and K. J. R. Liu, “A data analytic approach to quantifying scientific impact,” Journal of Informetrics, vol. 10, no. 2, pp. 471–484, 2016, doi: 10.1016/j.joi.2016.02.006.
  70. A. Agarwal et al., “Bibliometrics: tracking research impact by selecting the appropriate metrics,” Asian journal of andrology, vol. 18, no. 2, p. 296, 2016, doi: 10.4103/1008-682X.171582.
  71. E. Roldan-Valadez, S. Y. Salazar-Ruiz, R. Ibarra-Contreras, and C. Rios, “Current concepts on bibliometrics: a brief review about impact factor, Eigenfactor score, CiteScore, SCImago Journal Rank, Source-Normalised Impact per Paper, H-index, and alternative metrics,” Irish Journal of Medical Science (1971-), vol. 188, pp. 939–951, 2019, doi: 10.1007/s11845-018-1936-5.
  72. K. Balakrishnan et al., “The impact of air pollution on deaths, disease burden, and life expectancy across the states of India: the Global Burden of Disease Study 2017,” The Lancet Planetary Health, vol. 3, no. 1, pp. e26–e39, 2019, doi: 10.1016/S2542-5196(18)30261-4.
  73. R. J. Farrauto, M. Deeba, and S. Alerasool, “Gasoline automobile catalysis and its historical journey to cleaner air,” Nature Catalysis, vol. 2, no. 7, pp. 603–613, 2019, doi: 10.1038/s41929-019-0312-9.
  74. A. B. D. Nandiyanto, D. N. Al Husaeni, and D. F. Al Husaeni, “Introducing ASEAN Journal of Science and Engineering: A Bibliometric Analysis Study,” Journal of Advanced Research in Applied Sciences and Engineering Technology, vol. 31, no. 3, pp. 173–190, 2023, doi: 10.37934/araset.31.3.173190.
  75. D. N. Al Husaeni, D. F. Al Husaeni, A. B. D. Nandiyanto, and A. S. M. Al-Obaidi, “Introducing ASEAN Journal of Science and Engineering Education: A bibliometric analysis study for understanding internationalization,” Data and Metadata, vol. 1, p. 43, 2022, doi: 10.56294/dm202282.
  76. A. B. D. Nandiyanto, D. N. Al Husaeni, D. F. Al Husaeni, I. Hamidah, B. Maftuh, and M. Solehuddin, “Is Universitas Pendidikan Indonesia Ready for Internationalization? A Bibliometric Analysis in The Science and Technology-Related Publications,” Journal of Advanced Research in Applied Sciences and Engineering Technology, vol. 32, no. 2, pp. 14–29, 2023, doi: 10.37934/araset.32.2.1429.
  77. A. B. D. Nandiyanto, R. Ragadhita, and M. Aziz, “Involving Particle Technology in Computational Fluid Dynamics Research: A Bibliometric Analysis,” CFD Letters, vol. 15, no. 11, pp. 92–109, 2023, doi: 10.37934/cfdl.15.11.92109.
  78. D. F. Al Husaeni et al., “How technology can change educational research? Definition, factors for improving quality of education and computational bibliometric analysis,” ASEAN Journal of Science and Engineering, vol. 4, no. 2, pp. 127–166, 2024, doi: 10.17509/ajse.v4i2.62045.
  79. K. Meehan, N. L. Klenk, and F. Mendez, “The geopolitics of climate knowledge mobilization: Transdisciplinary research at the science–policy interface (s) in the Americas,” Science, Technology, & Human Values, vol. 43, no. 5, pp. 759–784, 2018, doi: 10.1177/0162243917745601.
  80. X. Wang et al., “Influence of coal co-firing on the particulate matter formation during pulverized biomass combustion,” Journal of the Energy Institute, vol. 92, no. 3, pp. 450–458, 2019, doi: 10.1016/j.joei.2018.05.003.
  81. I. Veza et al., “Strategies to achieve controlled auto-ignition (CAI) combustion: A review,” Mechanical Engineering for Society and Industry, vol. 3, no. 1, pp. 22–34, 2023, doi: 10.31603/mesi.7568.
  82. A. Kolakoti, A. V. Kumar, R. Metta, M. Setiyo, and M. L. Rochman, “Experimental studies on in-cylinder combustion, exergy performance, and exhaust emission in a Compression Ignition engine fuelled with neat biodiesels,” Indonesian Journal of Science and Technology, vol. 7, no. 2, pp. 219–236, 2022, doi: 10.17509/ijost.v7i2.49680.
  83. B. O. Bolaji, D. O. Bolaji, and S. T. Amosun, “Energy and cooling performance of carbon-dioxide and hydrofluoroolefins blends as eco-friendly substitutes for R410A in air-conditioning systems,” Mechanical Engineering for Society and Industry, vol. 3, no. 1, pp. 35–46, 2023, doi: 10.31603/mesi.8591.
  84. M. A. Ramly and M. Setiyo, “Carbon black: Production, properties, and utilization,” Mechanical Engineering for Society and Industry, vol. 3, no. 1, pp. 1–3, 2023, doi: 10.31603/mesi.8821.
  85. M. Setiyo, “Alternative fuels for transportation sector in Indonesia,” Mechanical Engineering for Society and Industry, vol. 2, no. 1, pp. 1–6, 2022, doi: 10.31603/mesi.6850.
  86. L. M. Olalekan, O. Olatunde, F. I. Olufemi, and A. A. Olamide, “Mathematical modeling and cost comparison for electricity generation from petrol and liquified petroleum gas (LPG),” Mechanical Engineering for Society and Industry, vol. 2, no. 2, pp. 57–63, 2022, doi: 10.31603/mesi.6697.
  87. S. Munahar, B. C. Purnomo, and H. Köten, “Fuel control systems for planetary transmission vehicles: A contribution to the LPG-fueled vehicles community,” Mechanical Engineering for Society and Industry, vol. 1, no. 1, pp. 14–21, 2021, doi: 10.31603/mesi.5263.
  88. M. Setiyo, N. Widodo, B. C. Purnomo, S. Munahar, M. A. Rahmawan, and A. Luthfi, “Harvesting cooling effect on lpg-fueled vehicles for mini cooler: A lab-scale investigation,” Indonesian Journal of Science and Technology, vol. 4, no. 1, pp. 39–47, 2019, doi: 10.17509/ijost.v4i1.12834.
  89. A. Kolakoti, M. Setiyo, and B. Waluyo, “Biodiesel production from waste cooking oil: Characterization, modeling and optimization,” Mechanical Engineering for Society and Industry, vol. 1, no. 1, pp. 22–30, 2021, doi: 10.31603/mesi.5320.
  90. A. Bhikuning and J. S. Senda, “The properties of fuel and characterization of functional groups in biodiesel-water emulsions from waste cooking oil and its blends,” Indonesian Journal of Science and Technology, vol. 5, no. 1, pp. 95–108, 2020, doi: 10.17509/ijost.v5i1.23103.
  91. A. Hidayat, W. Kurniawan, and H. Hinode, “Sugarcane bagasse biochar as a solid catalyst: From literature review of heterogeneous catalysts for esterifications to the experiments for biodiesel synthesis from palm oil industry waste residue,” Indonesian Journal of Science and Technology, vol. 6, no. 2, pp. 337–352, 2021, doi: 10.17509/ijost.v6i2.34498.
  92. K. Kareem, M. Rasheed, A. Liaquat, A. M. M. Hassan, M. I. Javed, and M. Asif, “Clean energy production from jatropha plant as renewable energy source of biodiesel,” ASEAN Journal of Science and Engineering, vol. 2, no. 2, pp. 193–198, 2022, doi: 10.17509/ajse.v2i2.39163.
  93. J. D. Waghmare, S. S. Patil, S. M. Patil, and M. Maske, “Study and review of properties and applications of Portland Pozzolana cement,” ASEAN Journal of Science and Engineering, vol. 1, no. 1, pp. 13–18, 2021, doi: 10.17509/ajse.v1i1.37980.
  94. F. B. Elehinafe, S. N. Ezekiel, O. B. Okedere, and O. O. Odunlami, “Cement industry–Associated emissions, environmental issues and measures for the control of the emissions,” Mechanical Engineering for Society and Industry, vol. 2, no. 1, pp. 17–25, 2022, doi: 10.31603/mesi.5622.
  95. S. N. Sutar, P. V. Patil, R. V. Chavan, and M. M. Maske, “Study and review of ordinary Portland cement,” ASEAN Journal of Science and Engineering, vol. 1, no. 3, pp. 153–160, 2021, doi: 10.17509/ajse.v1i3.37973.

Most read articles by the same author(s)

1 2 3 4 > >>