January - April

Published: Apr 27, 2024

Experimental Investigation for Enhancement of Heat Transfer Coefficient in Car Radiator by Using Multiwall Carbon Nanotube (MWCNT) Nanofluid

6-17 M. Peeraiah, K. Nagamalleswara Rao, B. Balakrishna
738

Study on Solar Powered Electric Vehicle with Thermal Management Systems on the Electrical Device Performance

18-27 Yusuf Dewantoro Herlambang, Wahyu Sulistiyo, Margana Margana, Nanang Apriandi, Septiantar Tebe Nursaputro, Marliyati Marliyati, Muji Setiyo, Wawan Purwanto, Muhammad Latifur Rochman, Jin Cherng Shyu
1026

Application of Multi-objective Adjoint-based Aerodynamic Optimisation on Generic Road Vehicle with Rear Spoiler

28-47 Aan Yudianto
440

Investigating Knocking Potential, Cycle Stability, and Emission Characteristics in Lean Spark Ignition Engine with Gasoline, Ethanol, and Methanol

48-62 Mokhtar Mokhtar, Bambang Sugiarto, Askar Adika Agama, Ade Kurniawan, Ahmad Syihan Auzani
548

Investigation of the Vehicle Driving Trajectory During Turning at Intersectional Roads Using Deep Learning Model

63-76 Ericsson Yong, Mohamad Heerwan Bin Peeie, Abdullah Bin Zulkifli, Muhammad Izhar Ishak, Mohd Zamri Bin Ibrahim, Muhammad Aizzat Bin Zakaria, Intan Suhana Binti Mohd Razelan, Ahmad Fakhri Bin Ab. Nasir, Zulhaidi Mohd Jawi
592

Characterizing of Nano Activated Bio-Carbon of Sago Waste as a Homogeneous Combustion Catalyst

77-85 Hendry Y. Nanlohy, Helen Riupassa, Muji Setiyo
967

Performance of Transition Metal Supported Al2O3 Coated on Honeycomb Catalysts and Its Segmentation on Exhaust Gasses Oxidation

86-96 Haris Puspito Buwono, Hangga Wicaksana, Moh Hartono, Joko Waluyo, Moch. Fauzun Daroini, Ilham Taufik Muslim, Masato Machida
442

Characterization of Combustion in Cylindrical Meso-Scale Combustor with Wire Mesh Flame Holder as Initiation of Energy Source for Future Vehicles

97-110 Andi Sanata, Nasrul Ilminnafik, Muhammad Maulana Asyhar, Hendry Y. Nanlohy, Franciscus Xaverius Kristianta, Imam Sholahuddin
617

Utilization of Bamboo Powder in The Production of Non-Asbestos Brake Pads: Computational Bibliometric Literature Review Analysis and Experiments to Support Sustainable Development Goals (SDGs)

111-131 Asep Bayu Dani Nandiyanto, Aisha Nadhira Syazwany, Karina Nur Syarafah, Themy Sabri Syuhada, Risti Ragadhita, Erna Piantari, Obie Farobie, Muhammad Roil Bilad
630

The Impact of Varying Mixing Rates in a Surfactant-Free Fuel Emulsion Mixer on the Efficiency and Emissions of a Diesel Engine

132-148 Budi Santoso, Agus Sartomo, Ubaidillah Ubaidillah, Oki Muraza, Elliza Tri Maharani
505

Collapse Behavior and Energy Absorption Characteristics of Design Multi-Cell Thin Wall Structure 3D-Printed Under Quasi Statistic Loads

149-160 Willy Artha Wirawan, Bambang Junipitoyo, Setyo Hariyadi Suranto Putro, A’yan Sabitah, Ahmad Hamim Suudy, Ridwan Ridwan, Moch. Agus Choiron
762

Optimization of the MCM-48 Synthesis Method as a Catalyst in the Esterification of Nyamplung Seed Oil into Biodiesel

161-170 La Kolo, La Yusran La Kalamu, Nunuk Hariani Soekamto, Paulina Taba, St. Fauziah, Maming Maming, Muhammad Zakir
554

Exploring the Factors Accelerating the Electric Motorcycle Adoptions: Insights from Theory of Planned Behavior and Travel Behavior

171-188 Muhammad Hafiz Aditya, Yuniaristanto Yuniaristanto, Wahyudi Sutopo
1169