Article Sidebar

Download
PDF
Statistic
Read Counter : 141 Download : 33

Downloads

Download data is not yet available.

Main Article Content

Abstract

This study aims to determine the reliability of applying a thermal management system in conjunction with Internet of Things in solar electric cars. In conventional electric cars or those whose driving energy source comes from gasoline fuel; the applied thermal management system is mainly used as a coolant for the internal combustion engine. However, for electric cars the thermal management system may be used for the main components such as controllers that convert solar module energy into electricity and batteries. Results from tests utilizing six DC fans for air cooling of the thermal management system yield two variations of battery charging conditions from the solar modules, namely variations of 25 and 400 turns of the trimmer constant current step-up charger. Test results from the proposed thermal management system show that the highest step-up charger temperature is 35.75 °C with voltage of 57.64 V for the variation of 25 laps. The test results on the battery voltage and temperature show that the highest battery temperature reaches 31.75 °C with voltage of 57.3 V at the variation of 25 rounds.

Keywords

Electric vehicle Thermal management system Voltage Current Efficiency

Article Details

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

References

  1. V. Karkuzhali, P. Rangarajan, V. Tamilselvi, and P. Kavitha, “Analysis of battery management system issues in electric vehicles,” 2020, doi: 10.1088/1757-899X/994/1/012013.
  2. Y. D. Herlambang, B. Prasetiyo, A. S. Alfauzi, T. Prasetyo, and F. Arifin, “Experimental and simulation investigation on savonius turbine: influence of inlet-outlet ratio using a modified blade shaped to improve performance,” Joint Journal of Novel Carbon Resource Sciences & Green Asia Strategy, vol. 9, no. 2, pp. 457–464, 2022, doi: 10.5109/4794172.
  3. Y. D. Herlambang et al., “Application of a PEM Fuel Cell Engine as a Small-Scale Power Generator for Small Cars with Different Fuel Concentrations,” Automotive Experiences, vol. 6, no. 2, pp. 273–289, Aug. 2023, doi: 10.31603/ae.9225.
  4. S. Kıvrak, T. Özer, Y. Oğuz, and E. B. Erken, “Battery management system implementation with the passive control method using MOSFET as a load,” Measurement and Control, vol. 53, no. 1–2, pp. 205–213, Jan. 2020, doi: 10.1177/0020294019883401.
  5. A. Geetha and C. Subramani, “A comprehensive review on energy management strategies of hybrid energy storage system for electric vehicles,” International Journal of Energy Research, vol. 41, no. 13, pp. 1817–1834, Oct. 2017, doi: 10.1002/er.3730.
  6. Y. D. Herlambang, A. Roihatin, S.-C. Lee, and J.-C. Shyu, “MEMS-Based Microfluidic fuel cell for in situ analysis of the cell performance on the electrode surface,” in Journal of Physics: Conference Series, 2020, vol. 1444, no. 1, p. 12044, doi: 10.1088/1742-6596/1444/1/012044.
  7. Y. D. Herlambang, F. Arifin, T. Prasetyo, and A. Roihatin, “Numerical analysis of phenomena transport of a proton exchange membrane (PEM) fuel cell,” Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, vol. 80, no. 2, pp. 127–135, 2021, doi: 10.37934/arfmts.80.2.127135.
  8. K. Liu, K. Li, Q. Peng, and C. Zhang, “A brief review on key technologies in the battery management system of electric vehicles,” Frontiers of Mechanical Engineering, vol. 14, no. 1, pp. 47–64, Mar. 2019, doi: 10.1007/s11465-018-0516-8.
  9. Y. D. Herlambang, S.-C. Lee, and H.-C. Hsu, “Numerical estimation of photovoltaic–electrolyzer system performance on the basis of a weather database,” International Journal of Green Energy, vol. 14, no. 7, pp. 575–586, 2017, doi: 10.1080/15435075.2017.1307200.
  10. S. F. Tie and C. W. Tan, “A review of energy sources and energy management system in electric vehicles,” Renewable and Sustainable Energy Reviews, vol. 20, pp. 82–102, Apr. 2013, doi: 10.1016/j.rser.2012.11.077.
  11. B. Sakhdari and N. L. Azad, “An Optimal Energy Management System for Battery Electric Vehicles,” IFAC-PapersOnLine, vol. 48, no. 15, pp. 86–92, 2015, doi: 10.1016/j.ifacol.2015.10.013.
  12. Y. Liao, J. H. Huang, and Q. Zeng, “Distributed Battery Management System in Battery Electric Vehicle,” Advanced Materials Research, vol. 201–203, pp. 2427–2430, Feb. 2011, doi: 10.4028/www.scientific.net/AMR.201-203.2427.
  13. I. C. Setiawan, “Policy Simulation of Electricity-Based Vehicle Utilization in Indonesia (Electrified Vehicle - HEV, PHEV, BEV and FCEV),” Automotive Experiences, vol. 2, no. 1, pp. 1–8, 2019, doi: 10.31603/AE.V2I1.2020.
  14. M. Setiyo, “Sustainable Transport: The Role of Clean Energy, Mass Rapid Transit, Non-motorized Mobility, and Challenges to Achievement,” Automotive Experiences, vol. 6, no. 1, pp. 1–3, 2023, doi: 10.31603/ae.9108.
  15. M. Setiyo, “Alternative fuels for transportation sector in Indonesia,” Mechanical Engineering for Society and Industry, vol. 2, no. 1, pp. 1–6, 2022, doi: 10.31603/mesi.6850.
  16. T. Kivevele, T. Raja, V. Pirouzfar, B. Waluyo, and M. Setiyo, “LPG-Fueled Vehicles: An Overview of Technology and Market Trend,” Automotive Experiences, vol. 3, no. 1, pp. 6–19, 2020, doi: 10.31603/ae.v3i1.3334.
  17. T. S. Rahmawati, Y. Yuniaristanto, W. Sutopo, and M. Hisjam, “Development of a Model of Intention to Adopt Electric Motorcycles in Indonesia,” Automotive Experiences, vol. 5, no. 3, pp. 494–506, Dec. 2022, doi: 10.31603/ae.7344.
  18. A. M. Zope, R. K. Swami, and A. Patil, “SEM Approach for Analysis of Lean Six Sigma Barriers to Electric Vehicle Assembly,” Automotive Experiences, vol. 6, no. 2, pp. 416–428, Aug. 2023, doi: 10.31603/ae.9690.
  19. H. Maghfiroh, O. Wahyunggoro, and A. I. Cahyadi, “Low Pass Filter as Energy Management for Hybrid Energy Storage of Electric Vehicle: A Survey,” Automotive Experiences, vol. 6, no. 3, pp. 466–484, 2023, doi: 10.31603/ae.9398.
  20. M. Noga, P. Gorczyca, and R. Hebda, “The Effects of Use of the Range Extender in a Small Commercial Electric Vehicle,” Automotive Experiences, vol. 4, no. 1, pp. 5–19, 2021, doi: 10.31603/ae.4137.
  21. X. Fei, H. Shenrui, S. Voon Wong, M. A. Azman, and H. Yunwu, “Mechanical Characteristics of Distributed Electric Wheel Loader in Shoveling Condition,” Automotive Experiences, vol. 6, no. 2, pp. 336–358, Aug. 2023, doi: 10.31603/ae.9024.
  22. A. G. Olabi et al., “Strength, weakness, opportunities, and threats (SWOT) analysis of fuel cells in electric vehicles,” International Journal of Hydrogen Energy, vol. 48, no. 60, pp. 23185–23211, Jul. 2023, doi: 10.1016/j.ijhydene.2023.02.090.
  23. M. N. H. Lubudi, “Rancang Bangun Battery Management System Active Balancing Pada Baterai LI-ION 12V 2, 5Ah,” Universitas Islam Indonesia, 2020.
  24. L. Buccolini, A. Ricci, C. Scavongelli, G. DeMaso-Gentile, S. Orcioni, and M. Conti, “Battery Management System (BMS) simulation environment for electric vehicles,” in 2016 IEEE 16th International Conference on Environment and Electrical Engineering (EEEIC), Jun. 2016, pp. 1–6, doi: 10.1109/EEEIC.2016.7555475.
  25. A. Hariprasad, I. Priyanka, R. Sandeep, and O. S. V. Ravi, “Battery Management System in Electric Vehicles,” International Journal of Engineering Research and, vol. V9, no. 05, May 2020, doi: 10.17577/IJERTV9IS050458.
  26. B. P. Divikar et al., “Battery management system and control strategy for hybrid and electric vehicle,” 2009.
  27. R. Hu, “Battery Management System for Electric Vehicle Applications,” University of Windsor, Ontario, Canada, 2021.
  28. M. Lelie et al., “Battery Management System Hardware Concepts: An Overview,” Applied Sciences, vol. 8, no. 4, p. 534, Mar. 2018, doi: 10.3390/app8040534.
  29. M. H. A. Wahab et al., “IoT-Based Battery Monitoring System for Electric Vehicle,” International Journal of Engineering & Technology, vol. 7, no. 4.31, 2022, doi: 10.14419/ijet.v8i1.4.25472.
  30. K. W. E. Cheng, B. P. Divakar, H. Wu, K. Ding, and H. F. Ho, “Battery-Management System (BMS) and SOC Development for Electrical Vehicles,” IEEE Transactions on Vehicular Technology, vol. 60, no. 1, pp. 76–88, Jan. 2011, doi: 10.1109/TVT.2010.2089647.
  31. H. Nakamura and M. Nakano, “Scenario Analysis for Clean Energy Vehicles in UK Considering Introduction of Renewable Energy Sources,” International Journal of Automation Technology, vol. 11, no. 4, pp. 592–600, Jul. 2017, doi: 10.20965/ijat.2017.p0592.
  32. S. H. Bharathi, Y. . N. Reddy, Dinesh, and R. Gopal, “IoT-Based Battery Monitoring System for Electric Vehicle,” Turkish Journal of Computer and Mathematics Education, vol. 12, no. 13, pp. 3524–3528, 2021, doi: 10.17762/turcomat.v12i13.9181.
  33. G. Trencher, “Strategies to accelerate the production and diffusion of fuel cell electric vehicles: Experiences from California,” Energy Reports, vol. 6, pp. 2503–2519, Nov. 2020, doi: 10.1016/j.egyr.2020.09.008.
  34. A. G. Abo-Khalil et al., “Electric vehicle impact on energy industry, policy, technical barriers, and power systems,” International Journal of Thermofluids, vol. 13, p. 100134, Feb. 2022, doi: 10.1016/j.ijft.2022.100134.
  35. F. Ahmad, M. Khalid, and B. K. Panigrahi, “Development in energy storage system for electric transportation: A comprehensive review,” Journal of Energy Storage, vol. 43, p. 103153, Nov. 2021, doi: 10.1016/j.est.2021.103153.
  36. Y. Chen and J. W. Evans, “Heat Transfer Phenomena in Lithium/Polymer‐Electrolyte Batteries for Electric Vehicle Application,” Journal of The Electrochemical Society, vol. 140, no. 7, p. 1833, 1993, doi: 10.1149/1.2220724.
  37. Deendarlianto, A. Widyaparaga, T. Widodo, I. Handika, I. Chandra Setiawan, and A. Lindasista, “Modelling of Indonesian road transport energy sector in order to fulfill the national energy and oil reduction targets,” Renewable Energy, vol. 146, pp. 504–518, 2020, doi: 10.1016/j.renene.2019.06.169.
  38. D. Keiner, M. Ram, L. D. S. N. S. Barbosa, D. Bogdanov, and C. Breyer, “Cost optimal self-consumption of PV prosumers with stationary batteries, heat pumps, thermal energy storage and electric vehicles across the world up to 2050,” Solar Energy, vol. 185, pp. 406–423, Jun. 2019, doi: 10.1016/j.solener.2019.04.081.
  39. H. Liu, Z. Wei, W. He, and J. Zhao, “Thermal issues about Li-ion batteries and recent progress in battery thermal management systems: A review,” Energy Conversion and Management, vol. 150, pp. 304–330, Oct. 2017, doi: 10.1016/j.enconman.2017.08.016.
  40. Y. Liu, Y. Zhu, and Y. Cui, “Challenges and opportunities towards fast-charging battery materials,” Nature Energy, vol. 4, no. 7, pp. 540–550, Jun. 2019, doi: 10.1038/s41560-019-0405-3.
  41. Z. Mokrani, D. Rekioua, and T. Rekioua, “Modeling, control and power management of hybrid photovoltaic fuel cells with battery bank supplying electric vehicle,” International Journal of Hydrogen Energy, vol. 39, no. 27, pp. 15178–15187, Sep. 2014, doi: 10.1016/j.ijhydene.2014.03.215.
  42. A. G. Olabi et al., “Assessment of the pre-combustion carbon capture contribution into sustainable development goals SDGs using novel indicators,” Renewable and Sustainable Energy Reviews, vol. 153, p. 111710, Jan. 2022, doi: 10.1016/j.rser.2021.111710.
  43. M. Ouyang et al., “Low temperature aging mechanism identification and lithium deposition in a large format lithium iron phosphate battery for different charge profiles,” Journal of Power Sources, vol. 286, pp. 309–320, Jul. 2015, doi: 10.1016/j.jpowsour.2015.03.178.
  44. J. A. Sanguesa, V. Torres-Sanz, P. Garrido, F. J. Martinez, and J. M. Marquez-Barja, “A Review on Electric Vehicles: Technologies and Challenges,” Smart Cities, vol. 4, no. 1, pp. 372–404, Mar. 2021, doi: 10.3390/smartcities4010022.